An analysis of molded deformation in injection-compression molded plastic lens by finite element method.
نویسندگان
چکیده
منابع مشابه
In vivo fiber-optic confocal reflectance microscope with an injection-molded plastic miniature objective lens.
For in vivo optical diagnostic technologies to be distributed to the developed and developing worlds, optical imaging systems must be constructed of inexpensive components. We present a fiber-optic confocal reflectance microscope with a cost-effective injection-molded plastic miniature objective lens for in vivo imaging of human tissues in near real time. The measured lateral resolution is less...
متن کاملFailure strengths of denture teeth fabricated on injection molded or compression molded denture base resins.
STATEMENT OF PROBLEM Denture tooth fracture or debonding remains a common problem in removable prosthodontics. PURPOSE The purpose of this in vitro study was to explore factors determining failure strengths for combinations of different denture tooth designs (shape, materials) and injection or compression molded denture base resins. MATERIAL AND METHODS Three central incisor denture tooth d...
متن کاملCharacterization and Compression Properties of Injection Molded Carbon Nanotube Composites
Since the development of carbon nanotubes (CNTs) in 1991, they have received much attention with improved mechanical, thermal, and electrical properties of their composites compared to common polymer composites. The CNTs are currently used to increase the modulus of common thermoplastics and thermosets, including urethanes and epoxies. The CNTs are difficult to disperse within any media because...
متن کاملSimulation of Plastic Deformation Behavior of Ti-6Al-4V Alloy by Finite Element Method
Mechanical properties of alloys have a strong relation with microstructure and determination of their behavior can lead to multiple advantages. To obtain this goal, finite element method )FEM( is one of the best ways. In this study a series of experiments were carried out on the produced Ti-6Al-4V to obtain its mechanical characteristics and to prepare it for photographing in micro dimensions. ...
متن کاملRNA chip: quality assessment of RNA by microchannel linear gel electrophoresis in injection-molded plastic chips.
Two major components of rRNA (18S and 28S rRNA) were separated by electrophoresis in injection-molded acrylic chips with a microchannel 100 microm in width, 40 microm in depth, and with 1 cm of separation distance. Microchannels were filled with 4 g/L hydroxypropylmethylcellulose as sieving polymer and 5 mg/L ethidium bromide for RNA staining. The fluorescent signals were detected by a fluoresc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KOBUNSHI RONBUNSHU
سال: 1988
ISSN: 0386-2186,1881-5685
DOI: 10.1295/koron.45.625