An Analysis of Anisotropic Etching Process. Etching toward Depth Direction.
نویسندگان
چکیده
منابع مشابه
An atomistic introduction to anisotropic etching
This review-oriented paper presents a simplified model of anisotropic etching of crystalline silicon for the three principal orientations (1 1 1), (1 1 0) and (1 0 0), including their vicinal surfaces. The model combines pit nucleation and step flow with micromasking and diffusion phenomena in order to explain the major morphologic features and their changes with concentration. It also qualitat...
متن کاملAnisotropic etching of SiC whiskers.
We have demonstrated a method of producing nanoplatelets or complex well-ordered nanostructures from silicon carbide (SiC) whiskers. Preferential etching of SiC whiskers in a mixture of hydrofluoric and nitric acids (3:1 ratio) at 100 degrees C results in the selective removal of cubic SiC and the formation of complex structures resembling a pagoda architecture. Possible mechanisms governing se...
متن کاملWet anisotropic etching of polyimide
With the aim of developing flexible biocompatible implants for in vivo studies of nerve regeneration [1], fabrication of passive polyimide membranes using the commercial available Kapton film (100HN and 50HN, from DuPont) was investigated. Polyimide has been widely used in microelectronics, and its application possibilities have been widening to other fields such as micromachining and biomedica...
متن کاملThree-Dimensional Simulation of Anisotropic Wet Chemical Etching Process
In this paper, we present result on the development of a simulation tool for the three-dimensional anisotropic wet chemical etching of bulk silicon etching or bulk micromaching. As a test of our simulation tool, we present several simulation results. Several simulation results demonstrate our simulation tool which is quite efficient for the design and development of MEMS device structure. The d...
متن کاملTMAH/IPA anisotropic etching characteristics
The main advantage of tetramethyl ammnium hydroxide (TMAH)-based solutions is their full compatibility with IC technologies. In this work a new etching system of TMAH/IPA (isopropyl alcohol) is suggested. The influence of the addition of IPA to TMAH solutions on their etching characteristics is presented. The etch rates of (100) oriented silicon crystal planes decreases linearly with decreasing...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1992
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.58.283