Amplitude-Dependent Internal Friction Study of Fatigue Deterioration in Carbon Fiber Reinforced Plastic Laminates
نویسندگان
چکیده
منابع مشابه
Amplitude-dependent Internal Friction and Dislocation Mobility in Crystals
The amplitude-dependent internal friction due to dislocations oscillating in the lattice is described in terms of dislocation mobility. This kind of intemal friction is expressed in elementary forms in the two limiting cases, i.e. at hish and low frequencies, and with the results obtained, the behavior of relaxation peaks due to dislocations are discussed 1 INTRODUCTION The amplitude-dependent ...
متن کاملDrilling of carbon fibre reinforced laminates – a study
The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in an increase of their use during the last decades. Although parts are normally produced to “near-net” shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most ...
متن کاملAmplitude-Dependent Internal Friction and Microplasticity in Thin-Film Materials
Internal friction in aluminum thin films on silicon substrates has been measured uaween 180 and 360 K as a function of strain amplitude. The amplitude dependence of internal fnction in the aluminum films has been evaluated from the data on the film-substrate composite and further converted into the plastic strain of the order of as a function of the effective stress on dislocation motion. The m...
متن کاملEffect of surface treatments on damping behavior of carbon and glass fiber reinforced friction material
The ability to absorb vibrations in a vehicle during braking conditions depends primarily on the selection of ingredients for a friction material and interfacial adhesion between all these ingredients. In this work, a hybrid brake friction material is developed by combination of carbon fiber (CF), glass fiber (GF), resin and other ingredients. The surfaces of carbon and glass fibers are c...
متن کاملDynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation
The fundamental frequencies and mode shapes of steel and carbon fiber–reinforced plastic (CFRP) cylindrical shells with steel inserts were investigated using finite element analysis and modal testing. The free-free boundary condition was tested with modal testing using the roving hammer method and verified by finite element analysis using ABAQUS. The results show good agreement between the test...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2018
ISSN: 1980-5373,1516-1439
DOI: 10.1590/1980-5373-mr-2017-0858