AMORPHIZATION OF TITANIUM AFTER SURFACE MECHANICAL ATTRITION TREATMENT
نویسندگان
چکیده
منابع مشابه
Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment
In terms of the grain refinement mechanism induced by plastic straining, a novel surface mechanical attrition treatment (SMAT) was developed for synthesizing a nanostructured surface layer on metallic materials in order to upgrade the overall properties and performance. In this paper, the SMAT technique and the microstructure of the SMAT surface layer will be described. The grain refinement mec...
متن کاملEffect of chemical mechanical polishing on surface nature of titanium implants FT-IR and wettability data of titanium implants surface after chemical mechanical polishing implementation
Bioactivity of titanium depends on the quality and characteristics of its surface oxide film. Through implementation of chemical mechanical polishing (CMP) process on titanium plates, a protective oxide (titania) film grows on the titanium based implant surface. In this article, surface properties of the titanium oxide are investigated as a function of the CMP process conditions. Surface respon...
متن کاملmartensite transformation and twinning deformation in fcc cobalt during surface mechanical attrition treatment
The deformation microstructure of face-centered cubic cobalt subjected to surface mechanical attrition treatment was studied as a function of strain levels. Strain-induced c ! e transformation and twinning deformation were evidenced by transmission electron microscopy and were found to progress continuously in ultrafine and nanocrystalline grains as the strain increased. 2004 Acta Materialia In...
متن کاملMechanical Behavior of Ultrafine Gradient Grain Structures Produced via Ambient and Cryogenic Surface Mechanical Attrition Treatment in Iron
Ambient and cryogenic surface mechanical attrition treatments (SMAT) are applied to bcc iron plate. Both processes result in significant surface grain refinement down to the ultrafine-grained regime; the cryogenic treatment results in a 45% greater grain size reduction. However, the refined region is shallower in the cryogenic SMAT process. The tensile ductility of the grain size gradient remai...
متن کاملSurface contamination of titanium by abrading treatment.
This study investigated the contamination of abraded Ti surfaces. Using a polishing machine, specimens were abraded with waterproof SiC grit papers under water cooling. The abraded surfaces were examined using element analysis, X-ray diffraction, and hardness tests. Contaminant deposits with dimensions reaching about 30 microns were observed throughout the surface. In these deposits, Ti was app...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Conference on Applied Mechanics and Mechanical Engineering
سال: 2012
ISSN: 2636-4360
DOI: 10.21608/amme.2012.36937