Amalgamation and Characterization of NiCo Ferrite by using Sol-gel Auto Combustion Technique
نویسندگان
چکیده
The effect of Nickel doped Cobalt ferrite nano particles Ni0.2CoxFe2-x04(x=0.1, 0.2, 0.3, 0.5) Created by sol-gel auto combustion technique using citric acid as fuel. single phase cubic structure form confirm the XRD. crystalline size calculated FWHM (311) plane Scherer’s formula. typicalsize sample varies in order regime. structural and lattice parameter were obtained XRD data. surface morphology ferrites was studied Field Emission Scanning Electron Microscope (FESEM), (SEM) images. spherical with average grain 25.62nm to 33.69nm range are observed FESEM Compositional stoichiometry confirmed X-ray photo electron spectroscopy.
منابع مشابه
Synthesis and characterization of nanocrystalline spinel Zinc ferrite prepared by sol-gel auto-combustion technique
Sol–gel auto-combustion is a unique combination of the combustion and the chemical gelation processes. In this work, nanosize (d) powders with compositions of ZnFe2O4 were synthesized by sol–gel combustion method. The puffy, porous brown powders as-combusted was calcined at the temperature of 750–1000◦C for 4 h. These powders are characterized by X-ray diffraction and scanning electron microsco...
متن کاملSynthesis and characterization of nanocrystalline spinel Zinc ferrite prepared by sol-gel auto-combustion technique
Sol–gel auto-combustion is a unique combination of the combustion and the chemical gelation processes. In this work, nanosize (d) powders with compositions of ZnFe2O4 were synthesized by sol–gel combustion method. The puffy, porous brown powders as-combusted was calcined at the temperature of 750–1000◦C for 4 h. These powders are characterized by X-ray diffraction and scanning electron microsco...
متن کاملsynthesis and characterization of nanocrystalline spinel zinc ferrite prepared by sol-gel auto-combustion technique
sol–gel auto-combustion is a unique combination of the combustion and the chemical gelation processes. in this work, nanosize (d) powders with compositions of znfe2o4 were synthesized by sol–gel combustion method. the puffy, porous brown powders as-combusted was calcined at the temperature of 750–1000◦c for 4 h. these powders are characterized by x-ray diffraction and scanning electron microsco...
متن کاملPreparation and Characterization of Nickel and Copper Ferrite Nanoparticles by Sol-Gel Auto-Combustion Method
Ferrites with spinel structure are the most widespread materials in radio engineering, electronics and communication industry, microwave devices and computer facilities. The change of synthesis temperature of ferrites results in cation redistribution of iron, which updates crystal properties, as macroscopic magnetic properties of ferrites. Among this extensive class of compounds nickel and copp...
متن کاملProduction of Sr-Ferrite Sub-Micron Powder by Conventional and Sol-Gel Auto-Combustion Methods
Magnetic powder of Sr-ferrite was prepared by conventional and sol-gel auto-combustion methods. In conventional method, strontium carbonate and ferric oxide powders were mixed together and then mixture was calcined. In sol-gel auto-combustion method, a solution containing strontium nitrate, ferric nitrate and citric acid was heated until the combustion took place automatically; then, as-burnt p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ACS Journal for Science and Engineering
سال: 2022
ISSN: ['2582-9610']
DOI: https://doi.org/10.34293/acsjse.v2i2.39