Aluminum Foam-Filled Steel Tube Fabricated from Aluminum Burrs of Die-Castings by Friction Stir Back Extrusion
نویسندگان
چکیده
منابع مشابه
Fabrication of Aluminum Foam-Filled Thin-Wall Steel Tube by Friction Welding and Its Compression Properties
Aluminum foam has received considerable attention in various fields and is expected to be used as an engineering material owing to its high energy absorption properties and light weight. To improve the mechanical properties of aluminum foam, combining it with dense tubes, such as aluminum foam-filled tubes, was considered necessary. In this study, an aluminum foam-filled steel tube, which consi...
متن کاملTensile Properties and Fracture Behavior of Aluminum Alloy Foam Fabricated from Die Castings without Using Blowing Agent by Friction Stir Processing Route
Al foam has been used in a wide range of applications owing to its light weight, high energy absorption and high sound insulation. One of the promising processes for fabricating Al foam involves the use of a foamable precursor. In this study, ADC12 Al foams with porosities of 67%-78% were fabricated from Al alloy die castings without using a blowing agent by the friction stir processing route. ...
متن کاملFabrication of Aluminum Tubes Filled with Aluminum Alloy Foam by Friction Welding
Aluminum foam is usually used as the core of composite materials by combining it with dense materials, such as in Al foam core sandwich panels and Al-foam-filled tubes, owing to its low tensile and bending strengths. In this study, all-Al foam-filled tubes consisting of ADC12 Al-Si-Cu die-cast aluminum alloy foam and a dense A1050 commercially pure Al tube with metal bonding were fabricated by ...
متن کاملAutomated Radioscopic Inspection of Aluminum Die Castings
Castings produced for the automotive industry are considered important components for overall roadworthiness. To ensure the safety of construction, it is necessary to check every part thoroughly using non-destructive testing. Radioscopy rapidly became the accepted way for controlling the quality of die cast pieces. In this paper the fundamental principles of the automated detection of casting d...
متن کاملAluminum extrusion with a deformable die
In aluminum extrusion, a work-piece (billet) is pressed through a die with an opening that closely resembles the desired shape of a profile. By this process, long profiles with an enormous variety of cross-sections can be produced to serve different markets such as building, construction and transport industry. When the shape of a profile does not conform to the specifications defined by the cu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2019
ISSN: 2075-4701
DOI: 10.3390/met9020124