Alumina doped Fe2O3 foams by freeze-casting for redox cycling applications
نویسندگان
چکیده
Hydrogen is the next energy vector for a decarbonization society but industrial production still methane-based. The Steam Iron Process (SIP) could provide carbon-free and safety storage option. Here, we show that Fe2O3-3 wt% of Al2O3 foams created by freeze-casting withstand 10 redox cycles at different temperatures with no reduction in performance or pore shrinking. use stearic acid as dispersant agent/binder produces porous structure enhancement foam promotes early hematite phase during sintering. incorporation was detected solid solution Fe2O3 particle surface. This result relevant correlated positive values zeta potential observed. Freeze-casted improve long-term performances combining unique tailored interconnected specific chemical composition.
منابع مشابه
Nanoreinforced xylan–cellulose composite foams by freeze-casting†
Structured biofoams have been prepared from the readily available renewable biopolymer xylan by employing an icetemplating technique, where the pore morphology of the material can be controlled by the solidification conditions and the molecular structure of the polysaccharide. Furthermore, reinforcement of these biodegradable foams using cellulose nanocrystals shows potential for strongly impro...
متن کاملBiomaterials by freeze casting.
The functional requirements for synthetic tissue substitutes appear deceptively simple: they should provide a porous matrix with interconnecting porosity and surface properties that promote rapid tissue ingrowth; at the same time, they should possess sufficient stiffness, strength and toughness to prevent crushing under physiological loads until full integration and healing are reached. Despite...
متن کاملFreeze granulation: Powder processing for transparent alumina applications
se of freeze granulated powders is successfully used as an industrially viable alternative to loose powder sintering for transparent polycrystalline lumina (PCA). Freeze granulation with narrow granule size distribution was realized after suspension condition optimization, with very good owability and regular spherical shapes. The key factors are low viscosity slurries linked to the complex int...
متن کاملFabrication of high–strength alumina composite foams through gel–casting process
A water–soluble gelatin combined with polyethylene microspheres were developed to prepare alumina composite foam. Gelatin was used as the gelling agent and polyethylene was used as pore making template. On the other hand, kaolin was used to provide green strength and CuO was applied to decrease the required temperature as a sinter aid. Alumina bodies need elevate temperature for sintering, incr...
متن کاملYield stress modelling of doped alumina suspensions for applications in freeze granulation: towards dry pressed transparent ceramics
Rheology of powder suspensions is a key factor in many processing routes, and better understanding of the parameters that control the rheology improves technical progress by reducing the empirical factors in the formulation of powder slurries. The strict requirements for the production of transparent polycrystalline alumina demand a fundamental understanding of powder handling and processing st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The European Ceramic Society
سال: 2022
ISSN: ['0955-2219', '1873-619X']
DOI: https://doi.org/10.1016/j.jeurceramsoc.2022.06.054