Alumina Coating To Realize Desired Pore Characteristics Of Sintered Diatomite Membrane
نویسندگان
چکیده
منابع مشابه
Dry Sintered Metal Coating of Halloysite Nanotubes
Halloysite nanotubes (HNTs) are a naturally-occurring aluminosilicate whose dimensions measure microns in length and tens of nanometers in diameter. Bonding defects between the alumina and silica lead to net negative and positive charges on the exterior and interior lumen, respectively. HNTs have been shown to enhance the material properties of polymer matrices and enable the sustained release ...
متن کاملSynthesis of cordierite powder from talc, diatomite and alumina
A cordierite powder was synthesized from a batch composition of talc, diatomite and alumina. Sintered samples of the synthesized cordierite were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA), and Rietveld analysis. The XRD analysis showed hexagonal or a-cordierite (indialite) as a major phase along with MgAl2O4 spinel and cristobalite as secondary phases in the s...
متن کاملMicrostructure and mechanical properties of pressureless sintered alumina-silver composites
The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...
متن کاملStructural evolution of the membrane-coating module of the nuclear pore complex.
The coatomer module of the nuclear pore complex borders the cylinder-like nuclear pore-membrane domain of the nuclear envelope. In evolution, a single coatomer module increases in size from hetero-heptamer (Saccharomyces cerevisiae) to hetero-octamer (Schizosaccharomyces pombe) to hetero-nonamer (Metazoa). Notably, the heptamer-octamer transition proceeds through the acquisition of the nucleopo...
متن کاملThe application of automated image analysis to dense heterogeneities in partially sintered alumina
his study used quantitative image analysis to examine the effect of powder forming method on a population of dense heterogeneities that could e imaged in partially sintered alumina using optical microscopy. Powder pressing resulted in a higher area fraction of dense heterogeneities than lip casting. Extreme value analysis was used to predict the size of the largest heterogeneity in the populati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Metallurgy and Materials
سال: 2015
ISSN: 2300-1909
DOI: 10.1515/amm-2015-0092