Alumina-carbon nanotube supports for sulfur-resistant regenerable Pt-based catalysts in NOx reduction
نویسندگان
چکیده
منابع مشابه
Reduction of NOx by H2 over Pt-K/Al2O3 Lean NOx Trap catalysts
Introduction Lean NOx Trap (LNT) catalysts are viable catalysts for the abatement of NOx emissions from lean–burn engines [1]. These systems work under periodic cyclic conditions, alternating lean (NOx storage) and rich conditions during which the stored NOx are reduced by a reductant. Although PtBa/Al2O3 is a typical model catalyst for this application, systems containing K have also been prop...
متن کاملCatalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts
The catalytic reduction of sulfur dioxide with methane to form elemental sulfur has been studied. Al2O3, Cu-Al2O3 and Ni-Al2O3 were examined as catalysts and their performances were compared in terms of SO2 conversion and selectivity. Performance of the catalyst extremely enhanced when nickel and copper were added as promoters. The effects of temperature, SO2/CH4 molar ratio, and reaction...
متن کاملNovel Mesoporous Carbon Supports for PEMFC Catalysts
Over the past decade; a significant amount of research has been performed on novel carbon supports for use in proton exchange membrane fuel cells (PEMFCs). Specifically, carbon nanotubes, ordered mesoporous carbon, and colloid imprinted carbons have shown great promise for improving the activity and/or stability of Pt-based nanoparticle catalysts. In this work, a brief overview of these materia...
متن کاملSulfur and Water Resistance of Mn-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOx: A Review
Selective catalytic reduction (SCR) with NH3 is the most efficient and economic flue gas denitrification technology developed to date. Due to its high low-temperature catalytic activity, Mn-based catalysts present a great prospect for application in SCR de-NOx at low temperatures. However, overcoming the poor resistance of Mn-based catalysts to H2O and SO2 poison is still a challenge. This pape...
متن کاملMultifunctional Catalysts for Singlewall Carbon Nanotube Synthesis
Single-wall carbon nanotubes (SWNTs) are usually produced with the help of metal catalysts that first break down various carbon species such as graphite, carbon clusters, amorphous carbon, or hydrocarbons and then release them in the form of SWNTs. These catalysts therefore must perform several functions in order to produce high quality, high yield, long SWNTs, and the finesse of these catalyst...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Catalysis
سال: 2013
ISSN: 1872-2067
DOI: 10.1016/s1872-2067(12)60745-1