All Fiber Laser Scribing of Cu(In,Ga)Se2 Thin-Film Solar Modules
نویسندگان
چکیده
منابع مشابه
CIGS thin-film solar module processing: case of high-speed laser scribing
In this paper, we investigate the laser processing of the CIGS thin-film solar cells in the case of the high-speed regime. The modern ultra-short pulsed laser was used exhibiting the pulse repetition rate of 1 MHz. Two main P3 scribing approaches were investigated - ablation of the full layer stack to expose the molybdenum back-contact, and removal of the front-contact only. The scribe quality ...
متن کاملLaser Scribing: a Key Enabling Technology for Manufacturing of Low Cost Thin Film Photovoltaic Cells
Solar cells are becoming a highly promising alternative energy source for various markets. In the last five years or so a tremendous amount of research effort has been put into increasing the efficiency of solar cell technology and reducing its manufacturing cost. It is believed that success in both of these areas will further propel its use in various markets. The two major structures commerci...
متن کاملOptimal geometric design of monolithic thin-film solar modules: Architecture of polymer solar cells
In this study the geometrical optimization of monolithically integrated solar cells into serially connected solar modules is reported. Based on the experimental determination of electrodes0 sheet and intermittent contact resistances, the overall series resistance of individual solar cells and interconnected solar modules is calculated. Taking a constant photocurrent generation density into acco...
متن کاملLaser Micro-Raman Spectroscopy of CVD Nanocrystalline Diamond Thin Film
Laser micro-Raman spectroscopy is an ideal tool for assessment and characterization of various types of carbon-based materials. Due to its special optical properties (CrN) coated stainless steel substrates. NCD films have been investigated by laser micro-Raman spectroscopy. The fingerprint of diamond based materials is in the spectral region of 1000-1600 cm-1 in the first order of Raman scatter...
متن کاملRemoval Mechanism and Defect Characterization for Glass-Side Laser Scribing of CdTe/CdS Multilayer in Solar Cells
Laser scribing is an important manufacturing process used to reduce photocurrent and resistance losses and increase solar cell efficiency through the formation of serial interconnections in large-area solar cells. High-quality scribing is crucial since the main impediment to large-scale adoption of solar power is its high production cost (price-per-watt) compared to competing energy sources suc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physics Procedia
سال: 2013
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2013.03.138