All-electric all-semiconductor spin field-effect transistors
نویسندگان
چکیده
منابع مشابه
All-electric all-semiconductor spin field-effect transistors.
The spin field-effect transistor envisioned by Datta and Das opens a gateway to spin information processing. Although the coherent manipulation of electron spins in semiconductors is now possible, the realization of a functional spin field-effect transistor for information processing has yet to be achieved, owing to several fundamental challenges such as the low spin-injection efficiency due to...
متن کاملField-effect transistors built from all two-dimensional material components.
We demonstrate field-effect transistors using heterogeneously stacked two-dimensional materials for all of the components, including the semiconductor, insulator, and metal layers. Specifically, MoS2 is used as the active channel material, hexagonal-BN as the top-gate dielectric, and graphene as the source/drain and the top-gate contacts. This transistor exhibits n-type behavior with an ON/OFF ...
متن کاملFrequency response of LaAlO3/SrTiO3 all-oxide field-effect transistors
The frequency response of all oxide field-effect transistors with amorphous LaAlO3 on a crystalline SrTiO3 substrate is reported. The intrinsic cut-off frequencies of 4 lm gate-length devices are found to be approximately 17 MHz indicating that with gate length scaling gigahertz cut-off frequency is possible. The low cut-off frequency is primarily limited by the low effective mobility. The esti...
متن کاملAtomic-layer-deposited LaAlO3/SrTiO3 all oxide field-effect transistors
We have demonstrated well-behaved accumulation-mode all oxide NMOSFETs with amorphous atomic-layer-deposited (ALD) LaAlO3 gate dielectric stacks on crystalline SrTiO3 substrates. A maximum drain current exceeding 10 mA/mm has been obtained on a 3.75μm-gate-length device, proving a very conductive channel can be formed at the oxide-oxide interface. Four different gate dielectric stacks, which ar...
متن کاملBand bending engineering in p-i-n gate all around Carbon nanotube field effect transistors by multi-segment gate
The p-i-n carbon nanotube (CNT) devices suffer from low ON/OFF current ratio and small saturation current. In this paper by band bending engineering, we improved the device performance of p-i-n CNT field effect transistors (CNTFET). A triple gate all around structure is proposed to manage the carrier transport along the channel. We called this structure multi-segment gate (MSG) CNTFET. Band to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Nanotechnology
سال: 2014
ISSN: 1748-3387,1748-3395
DOI: 10.1038/nnano.2014.296