Alkaline membrane fuel cell (AMFC) modeling and experimental validation

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling of hydrogen alkaline membrane fuel cell with interfacial effect and water management optimization

In this study, a whole-cell 3D multiphase non-isothermal model is developed for hydrogen alkaline anion exchange membrane (AAEM) fuel cell, and the interfacial effect on the two-phase transport in porous electrode is also considered in the model. The results show that the insertion of anode MPL, slight anode pressurization and reduction of membrane thickness generally improve the cell performan...

متن کامل

Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells

In this study cross section geometry and material of gasket in proton exchange membrane (PEM) fuel cells have been investigated to achieve optimized fuel cell in terms of energy efficiency. The role of gaskets in fuel cells is sealing of gas flow channels and preventing from combination of them. In a PEM stack, gasket with approved geometry that suffers more stress has better sealing. For this ...

متن کامل

Poly (Ether Ether Ketone) Based Anion Exchange Membrane for Solid Alkaline Fuel Cell: A Review

Solid alkaline fuel cell is employed by polymer anion exchange membrane (AEM) that is permeable to hydroxide ion. A number of polymers have been proposed for AEM which include polysulfone (PSF), poly (phenylene oxide) (PPO), and poly (ether ether ketone) (PEEK). The purpose of this paper was to conduct a critical review on the development of PEEK polymer as AEM, particu...

متن کامل

A high-performance alkaline exchange membrane direct formate fuel cell

This paper reports on a single alkaline exchange membrane direct formate fuel cell (AEM DFFC) consisting of a carbon-supported palladium catalyst at the anode, a quaternized polysulfone membrane, and a non-precious Fe–Co catalyst at the cathode. It is demonstrated that the AEM DFFC yields a peak power density of 130 mW cm 2 with 5 M potassium formate (HCOOK) at 80 C. It is further shown that wi...

متن کامل

Transient investigation of passive alkaline membrane direct methanol fuel cell

Passive direct methanol fuel cell (DMFC) is considered as an attractive power source for portable devices. In this study, a transient multiphase model for passive alkaline anion exchange membrane DMFC (AAEMDMFC) is developed. The results show that the power density decreases during the operation and is more difficult to maintain stable with higher current density or lower voltage. The fuel effi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Power Sources

سال: 2012

ISSN: 0378-7753

DOI: 10.1016/j.jpowsour.2012.03.089