Alkalic Leaching and Stabilization of Arsenic from Pyrite Cinders
نویسندگان
چکیده
منابع مشابه
Alkalic Leaching and Stabilization of Arsenic from Pyrite Cinders
Results & Discussion: The content of arsenic in pyrite cinders was reduced to 0.08% through the investigation of the factors, including particle size, alkaline concentration, temperature, solid-liquid ratio (S/L) and leaching time. Then, the ferric precipitation method was used to remove the arsenic in the leaching solution. More than 99% of the arsenic can be removed by controlling the pH and ...
متن کاملArsenic release from pyrite ashes: kinetic studies.
Arsenic mobility in pyrite ashes was studied because of the possible effects on water systems. The batch extraction method was used to assess kinetics and extent of As release induced by contact of the material either with rainwater or groundwater. Self-established pH-Eh range of pyrite ashes/water mixtures brought both As(III) and As(V) to be present in the water phase, as neutral arsenite H3A...
متن کاملBadruzzaman: Leaching of Arsenic from Arsenic Removal Wastes
Arsenic in groundwater was first detected in Bangladesh at Chapai Nawabgonj district in 1993. Since then arsenic contamination problem has been reported from almost every parts of the country. It is estimated that approximately 27% of the wells are contaminated with levels above 50ppb, the current drinking water standard for arsenic in Bangladesh (Kinninburg, D. G., et al., 2001). It is also es...
متن کاملSulfur chemistry in bacterial leaching of pyrite.
In the case of pyrite bioleaching by Leptospirillum ferrooxidans, an organism without sulfur-oxidizing capacity, besides the production of tetra- and pentathionate, a considerable accumulation of elemental sulfur occurred. A similar result was obtained for chemical oxidation assays with acidic, sterile iron(III) ion-containing solutions. In the case of Thiobacillus ferrooxidans, only slight amo...
متن کاملStability Analysis and Stabilization of Miduk Heap Leaching Structure, Iran
To construct copper heap leaching structures, a stepped heap of ore is placed over an isolated sloping surface and then washed with sulphuric acid. The isolated bed of such a heap consists of some natural and geosynthetic layers. Shear strength parameters between these layers are low, so they form the possible sliding surfaces of the heaps. Economic and environmental considerations call for stu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Waste Management Journal
سال: 2017
ISSN: 1876-4002
DOI: 10.2174/1876400201710010041