Alkali-Added Catalysts Based on LaAlO3 Perovskite for the Oxidative Coupling of Methane

نویسندگان

چکیده

In this study, we aimed to enhance the catalytic activity of perovskite catalysts and elucidate their behavior in oxidative coupling methane (OCM), using alkali-added LaAlO3 catalysts. We prepared LaAlO3_XY (X = Li, Na, K, Y mol %) applied them OCM reaction. The results showed that catalysts’ activities were promoted compared catalyst. reaction, ethane was first synthesized through dimerization methyl radicals, which produced from reaction oxygen vacancy high ethylene selectivity originated abundance electrophilic lattice species, facilitating selective formation C2 hydrocarbons ethane. COx (carbon monoxide carbon dioxide) catalyst its nucleophilic favoring production concluded species play a significant role producing ethylene. obtained alkali-adding could be an effective method for improving

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Additives on Mn/SiO2 Based Catalysts on Oxidative Coupling of Methane

The Oxidative Coupling of Methane (OCM) over M-Na-Mn/SiO2 catalysts (M=W, Cr, Nb and V) was investigated using a continuous-flow quartz reactor at 775°C, 1 atm and 100 cm3min-1 gas flow rates, and correlated with the observed structure and redox properties.The interaction effects of the metal-metal and metal-support on the...

متن کامل

effect of additives on mn/sio2 based catalysts on oxidative coupling of methane

the oxidative coupling of methane (ocm) over m-na-mn/sio2 catalysts (m=w, cr, nb and v) was investigated using a continuous-flow quartz reactor at 775°c, 1 atm and 100 cm3min-1 gas flow rates, and correlated with the observed structure and redox properties.the interaction effects of the metal-metal and metal-support on the methane conversion and c2+ yield were investigated using x-ray diffracti...

متن کامل

Potassium/calcium/nickel oxide catalysts for oxidative coupling of methane

A series of potassium/calcium/nickel oxides were tested for the oxidative coupling of methane (OCM) at 843-943 K and water addition to the feed at O-65 mol-%. The K/Ni ratios varied from 0.0-0.6 and Ca/Ni from 0.0-11; catalysts with no nickel were also tested. At least 10% water in the feed and temperatures lower than ca. 940 K were necessary to keep nickel-containing catalysts from converting ...

متن کامل

Oxidative coupling of methane over doped Li/MgO catalysts

A series of zirconia doped Li/MgO catalysts with a fixed amount of zirconia and varying concentrations of lithium was used for the oxidative coupling of methane. It was found that an increase in lithium concentration resulted in a decrease in initial activity, while the selectivity was not affected. The life-time of Zr doped Li/MgO catalysts with a fixed concentration of ZrOz is a function of t...

متن کامل

Miniplant-Scale Analysis of Oxidative Coupling of Methane Process

For more than three decades, Oxidative Coupling of Methane (OCM) process has been comprehensively investigated as an attractive alternative for the commercially available ethylene production technologies such as ethane and naphtha cracking. Developing a suitable catalyst and proper reactor feeding policy, reviewing and deploying the efficient methods in the separation and purification of the un...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: ChemEngineering

سال: 2021

ISSN: ['2305-7084']

DOI: https://doi.org/10.3390/chemengineering5010014