AlF3-Assisted Flux Growth of Mullite Whiskers and their Application in Fabrication of Porous Mullite-alumina Monoliths
نویسندگان
چکیده
منابع مشابه
Recycling of Coal Fly Ash for the Fabrication of Porous Mullite/Alumina Composites
Coal fly ash with the addition of Al₂O₃ was recycled to produce mullite/alumina composites and the camphene-based freeze casting technique was processed to develop a controlled porous structure with improved mechanical strength. Many rod-shaped mullite crystals, formed by the mullitization of coal fly ash in the presence of enough silicate, melt. After sintering at 1300-1500 °C with the initial...
متن کاملMullite-alumina functionally gradient ceramics
Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...
متن کاملMullite/Alumina Mixtures for Use as Porous Matrices in Oxide Fiber Composites
Weakly bonded particle mixtures of mullite and alumina are assessed as candidate matrixes for use in porous matrix ceramic composites. Conditions for the deflection of a matrix crack at a fiber-matrix interface are used to identify the combinations of modulus and toughness of the fibers and the matrix for which damage-tolerant behavior is expected to occur in the composite. Accordingly, the pre...
متن کاملNanocomposite mullite/mullite powders by spray pyrolysis
A mullite/mullite nanocomposite powder has been synthesized, composed of nanometer-size 3Al2O3 · 2SiO2 (‘3 : 2’) mullite precipitates within a matrix of the high alumina 2Al2O3 · SiO2 (‘2 : 1’) mullite. Historically, the transition from the metastable high-alumina phase to the thermodynamically stable ‘3 : 2’ phase of mullite has been thought to be a continuous process, involving a continuous s...
متن کاملMicrowave Sintering of Mullite
Microwave sintering possesses unique attributes and has the potential to be development as a new technique for controlling microstructure and to improve the properties of advanced ceramics. Because microwave radiation penetrates most ceramics, uniform volumetric heating is possible. Thermal gradients, which are produced during conventional sintering because of conductive and radioactive heat tr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open Ceramics
سال: 2021
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2021.100145