Al2O3-modified 7YSZ thermal barrier coatings for protection against volcanic ash corrosion

نویسندگان

چکیده

Abstract To prevent volcanic ash corrosion using thermal barrier coatings (TBCs), a novel method Al 2 O 3 -modification was proposed to reduce molten CMAS wettability on TBCs surface through lotus effect. Plasma spray-physical vapor deposition (PS-PVD), third-generation for fabrication, adopted deposit 7YSZ with feather-like microstructure. Then, modification introduced fabricate dense overlay nano/micro-sized grains the surface. The wetting ability of APS/EB-PVD/PS-PVD comparatively in situ observed at 1250 °C 3600 s. results indicated that inhibited penetration CMAS. Additionally, micro/nano dual-sized structure, which is similar papillary structure leaf, reduced demonstrated -modified had better resistance than as-deposited TBCs.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thermal Sprayed Coatings Used Against Corrosion and Corrosive Wear

Coatings have historically been developed to provide protection against corrosion and erosion that is to protect the material from chemical and physical interaction with its environment. Corrosion and wear problems are still of great relevance in a wide range of industrial applications and products as they result in the degradation and eventual failure of components and systems both in the proc...

متن کامل

Erosion, Corrosion and Erosion-Corrosion of EB PVD Thermal Barrier Coatings

Electron beam (EB) physical vapour deposited (PVD) thermal barrier coatings (TBCs) have been used in gas turbine engines for a number of years. The primary mode of failure is attributed to oxidation of the bondcoat and growth of the thermally grown oxide (TGO), the alumina scale that forms on the bondcoat and to which the ceramic top coat adheres. Once the TGO reaches a critical thickness the T...

متن کامل

AN INVESTIGATION ON EFFECT OF BOND COAT REPLACEMENT ON HOT CORROSION PROPERTIES OF THERMAL BARRIER COATINGS

In the present study NiCrAlY bond coating layer was produced by electroplating against common atmospheric plasma spraying (APS). Both types of the bond coats were applied on IN738LC base metal then, the YSZ (ZrO2-8% Y2O3) thermal barrier top layer was coated by atmospheric plasma spray technique. Hot corrosion is one of the main destructive factors in thermal barrier coatings (TBCs) which come ...

متن کامل

Corrosion Protection Performance of Nanoclay-Polyester Nanocomposite Coatings

In this paper, polymer-based nanocomposites powder were applied on the surface of plain carbon steel by electrostatic device and then were cured by microwave. The effect of adding nanoparticles on the corrosion resistance properties of the coatings was investigated by Electrochemical Impedance Spectroscopy and immersion test in 3.5 NaCl solution. Coatings structure and morphology of nanoparticl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: npj Materials degradation

سال: 2022

ISSN: ['2397-2106']

DOI: https://doi.org/10.1038/s41529-022-00308-3