Al and Fe Contents in Seaweeds
نویسندگان
چکیده
منابع مشابه
Room Temperature Oxidation of Al-Cu-Fe and Al-Cu-Fe-Cr Quasicrystals
We have investigated formation of oxides on quasicrystalline and crystalline alloy surfaces of similar composition, in different oxidizing environments. This includes a comparison between a quaternary orthorhombic approximate of Al-Cu-Fe-Cr quasicrystal and the ternary AI-Cu-Fe quasicrystalline and crystalline phases. We noted that each sample showed the following common trends: preferential ox...
متن کاملCALCULATION OF THERMODYNAMIC PROPERTIES OF Al-Fe, Al-Ni AND Ni-Fe ALLOYS USING FACTSAGE
Thermodynamic predicting analysis of three binary systems Al-Fe, Al-Ni and Ni-Fe are shown in this paper. Thermodynamic analysis involved calculation of activities, coefficient of activities, partial and integral values for enthalpies and Gibbs energies of mixing and excess energies at three different temperatures: 1873K, 1900K and 1973K, as well as calculated phase diagrams, for the investigat...
متن کاملFabrication of Fe-Al nanoparticles by selective oxidation of Fe-Al thin films
The possibility of a new technique for fabricating nanoparticles from thin films using selective oxidation in an atmosphere mixture of water vapor and hydrogen was investigated. Fe-5wt.%Al films were RF-sputtered and annealed in the atmosphere mixture at 900°C for up to 200 min, in order to oxidize aluminum selectively. Thermodynamics simulation showed that temperatures exceeding 800°C are nece...
متن کاملTotal phenolic contents, radical scavenging and cyclic voltammetry of seaweeds from Brittany
The role of polyphenols as antioxidants in our daily nutrition has been extensively investigated, but information on composition of tannins from marine sources on nutrient utilisation is limited. This study will be focused on the determination of the polyphenol quantities in brown seaweeds from Brittany coast in France; the extracts were delivered from algae centre for valorisation (CEVA), and ...
متن کاملModification of Primary Si Crystals and Fe-rich Intermetallics in LM28 Al Alloy Fabricated Through Thixoforming
In the present research, thixoforming route was carried out in order to enhance the microstructural features of LM28 piston alloy. Typical microstructure of this alloy was composed of coarse, polygonal primary silicon particles, eutectic matrix and intermetallic phases. Thermal analysis was carried out to study the solidification path of the base alloy and determine the major arrest temperature...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nippon kagaku zassi
سال: 1962
ISSN: 0369-5387,2185-0917
DOI: 10.1246/nikkashi1948.83.77