Air Leakage of Joints Filled with Polyurethane Foam
نویسندگان
چکیده
منابع مشابه
Multi-response Optimization of Grooved Circular Tubes Filled with Polyurethane Foam as Energy Absorber
The main objective of this research is to improvethe design and performance of the polyurethane foam-filled thin-walled aluminum grooved circular tubes using multi-response optimization (MRO) technique. The tubes are shaped with the inner and the outer circular grooves at different positions along the axis. For this aim, several numerical simulations using ABAQUS finite element explicit code ar...
متن کاملAnisotropic polyurethane foam
Anisotropic polymer foams have been prepared, which exhibit a Poisson's ratio exceeding 1, and ratios of longitudinal to transverse stiffness exceeding 50. The foams are as much as 20 times stiffer in the longitudinal direction than the foams from which they were derived. The transformation process involved applying a uniaxial stress sufficient to produce 25% to 45% axial strain to open-cell po...
متن کاملNonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملCharacterization of Hot Bituminous-Asphalt Mixtures with Recycled Polyurethane Foam
Received: June 06, 2017 Revised: July 05, 2017 Accepted: July 19, 2017 Abstract: Introduction: The use of polymer wastes in pavement as road is an increasing trend in the road construction sector. Those new pavements reduce the amount of solid waste disposed into landfills and provide more sustainable construction due to the use of in-situ materials. Polyurethane foam waste is a thermostable po...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Buildings
سال: 2019
ISSN: 2075-5309
DOI: 10.3390/buildings9070172