Air Jet Erosion Wear Behavior of Al6061-SiC-Carbon Fibre Hybrid Composite
نویسندگان
چکیده
منابع مشابه
Microstructural Analysis and Wear Performance of Carbon-Fiber-Reinforced SiC Composite for Brake Pads
Carbon-fiber-reinforced silicon carbide (C/C-SiC) composite is widely used as a friction material owing to its good performance, even though it is more expensive than metallic materials. The light C/C-SiC composite is an ideal candidate for weight reduction of frictional parts. In this study, the friction and wear behavior of C/C-SiC composite was assessed using a ball-on-disk friction tester u...
متن کاملCarbon Fibre Composite Bone Plates
We compared the mechanical properties of carbon fibre composite bone plates with those of stainless steel and titanium. The composite plates have less stiffness with good fatigue properties. Tissue culture and small animal implantation confirmed the biocompatibility of the material. We also present a preliminary report on the use of the carbon fibre composite plates in 40 forearm fractures. All...
متن کاملWear of ceramic-on-carbon fibre reinforced PEEK hip replacements
Total hip replacement has been a successful surgical intervention for many years. However, concerns regarding UHMWPE wear particle induced osteolysis [1], have led to alternative bearing materials to be sought. Carbon-fibre reinforced poly-ether-ether-ketone (CFR-PEEK) is a fibre-reinforced polymer which has shown reduced wear in hip and knee configurations compared with conventional polyethyle...
متن کاملParametric Optimization of KERF Width and Surface Roughness in Wire Electrical Discharge Machining (WEDM) of Hybrid Aluminium (Al6061/SIC/GRAPHITE) Composite using TAGUCHI-Based Gray Relational Analysis
In this present investigation, the effect and optimization of machining parameters on the kerf width and surface roughness in wire electrical discharge machining (WEDM) operations of Al 60661 hybrid composite was studied. The hybrid metal matrix composite was fabricated by stir casting process using particulates SiC and graphite each in Al6061 alloy. The experiments were designed with L27 ortho...
متن کاملHybrid Carbon Nanotube-Composite Architectures
Hybrid composite architectures employing traditional advanced composites and carbon nanotubes (CNTs) offer significant potential mechanical and multifunctional performance benefits. Dense patterns of well-aligned carbon nanotubes (CNTs) were grown on silicon wafers using a thermal chemical vapor deposition (CVD) process [1]. Wetting of CNTs and retention of mechanical properties of the fibers a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science Forum
سال: 2013
ISSN: 1662-9752
DOI: 10.4028/www.scientific.net/msf.773-774.547