Air-cooled phosphoric acid fuel cell.
نویسندگان
چکیده
منابع مشابه
Thermal Analysis of Air-cooled Fuel Cells
All rights reserved. However, in accordance with the Copyright Act of Canada, this work may be reproduced, without authorization, under the conditions for Fair Dealing. Therefore, limited reproduction of this work for the purposes of private study, research, criticism, review and news reporting is likely to be in accordance with the law, particularly if cited appropriately. ABSTRACT Temperature...
متن کاملComputational Analysis of Heat Transfer in Air-cooled Fuel Cells
Temperature distribution in a fuel cell significantly affects the performance and efficiency of the fuel cell system. Particularly, in low temperature fuel cells, improvement of the system requires addressing the heat management issues, which reveals the importance of developing thermal models. In this study, a 3D numerical thermal model is presented to analyze heat transfer and predict the tem...
متن کاملHardware/Software Data Acquisition System for Real Time Cell Temperature Monitoring in Air-Cooled Polymer Electrolyte Fuel Cells
This work presents a hardware/software data acquisition system developed for monitoring the temperature in real time of the cells in Air-Cooled Polymer Electrolyte Fuel Cells (AC-PEFC). These fuel cells are of great interest because they can carry out, in a single operation, the processes of oxidation and refrigeration. This allows reduction of weight, volume, cost and complexity of the control...
متن کاملElectric Power Generation Using A Phosphoric Acid Fuel Cell On A Municipal Solid Waste Landfill Gas Stream
The U.S. Environmental Protection Agency (EPA) and International Fuel Cells Corporation conducted a test to verify the performance of a landfill gas treatment unit and a phosphoric acid fuel cell system. The complete system removes contaminants from landfill gas and produces electricity for on-site use or connection to an electric grid. The verification test was the first use of fuel cell techn...
متن کاملPhosphoric acid functionalized pre-sintered meso-silica for high temperature proton exchange membrane fuel cells.
An inorganic proton exchange membrane based on sintered mesoporous silica and phosphoric acid was developed with a high proton conductivity of 0.06 S cm(-1) at 200 °C, achieving an excellent power output of 689 mW cm(-2) in H2 at 190 °C and 200 mW cm(-2) in methanol at 200 °C with no external humidification.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON KAGAKU KAISHI
سال: 1988
ISSN: 2185-0925,0369-4577
DOI: 10.1246/nikkashi.1988.1357