Age-hardening behaviors and mechanical properties of Al-Li-Cu-Mg-Zr alloy.

CORROSION BEHAVIOUR OF Al-Li-Cu-Mg ALLOY 8090-T651

بررسی و آموزش پدیده تبلور مجدد دینامیکی آلیاژ Al-Li-Cu-Zr(-Mg)

در این پژوهش پدیده تبلور مجدد دینامیکی یک نمونه آلیاژ  Al-Liدر دماهای C°350 و C°400 بررسی شده است. نمونه های متفاوت آلیاژ به شکل گوه تهیه شده و در دماهای C°350 و C</str...

THE INFLUENCE OF DRY SLIDING ON PRCIPITATION HARDENING BEHAVIORS OF Al-Cu-Si ALLOY

Abstract: Cold working performed before an aging treatment has a significant effect on size and amount of precipitate produced. This could be caused by the increase in defect density, such as vacancies and dislocations. In this research, the Al-Cu-Si alloy was solution-treated, wear-tested and then artificially aged for a period of 1–5 h. Changes in the amount of precipitate, in the lattice par...

CASTABILITY OF Al-Li-Mg AND Al-Li-Cu-Mg ALLOYS

The objective of the present work is to study the casting characteristics of various A1-Li alloys, which include fluidity and strengths of the alloys and their interaction with cast molds. Materials investigated are Al-Li-Mg and Al-Li-Cu-Mg alloys with Li content of 2.5 wt%. The results show that sand molds with resin binders are good for A1-Li casting. Ceramic coatings can further reduce the m...

Precipitation Behavior and Quenching Sensitivity of a Spray Deposited Al-Zn-Mg-Cu-Zr Alloy

Precipitation behavior and the quenching sensitivity of a spray deposited Al-Zn-Mg-Cu-Zr alloy during isothermal heat treatment have been studied systematically. Results demonstrate that both the hardness and the ultimate tensile strength of the studied alloy decreased with the isothermal treatment time at certain temperatures. More notably, the hardness decreases rapidly after the isothermal h...