Ag Nanowire and Nanoplate Composite Paste for Low Temperature Bonding
نویسندگان
چکیده
منابع مشابه
Low-Temperature and Low-Pressure Cu–Cu Bonding by Highly Sinterable Cu Nanoparticle Paste
A reliable Cu-Cu bonding joint was achieved by using the highly sinterable Cu nanoparticle paste. Pure copper nanoparticles used in the preparation of nanoparticle paste were synthesized through simple routes, with an average size of 60.5 nm. Under an Ar-H2 gas mixture atmosphere, the Cu nanoparticle paste exhibited large areas of fusion after sintering at 300 °C and reached a low electrical re...
متن کاملAnalysis of Hollow Fiber Temperature Sensor Filled with Graphene-Ag Composite Nanowire and Liquid
A hollow fiber temperature sensor filled with graphene-Ag composite nanowire and liquid is presented and numerically characterized. The coupling properties and sensing performances are analyzed by finite element method (FEM) using both wavelength and amplitude interrogations. Due to the asymmetrical surface plasmon resonance sensing (SPR) region, the designed sensor exhibits strong birefringenc...
متن کاملRobust Ag nanoplate ink for flexible electronics packaging.
Nanoinks are currently a topic of heightened interest with respect to low temperature bonding processes and printable electronics. We have developed an innovative polyvinylpyrrolidone (PVP)-stabilized Ag nanoplate ink amenable to very strong low temperature packaging, and investigated the relationship between bonding strength and electrical conductivity post-bonding. PVP shell plastic deformati...
متن کاملLow temperature bonding technology for 3D integration
0026-2714/$ see front matter 2011 Elsevier Ltd. A doi:10.1016/j.microrel.2011.03.038 ⇑ Corresponding author. E-mail address: [email protected] (K.-N. C 3D integration provides a promising solution to achieve system level integration with high function density, small form factor, enhanced transmission speed and low power consumption. Stacked bonding is the key technology to enable the comm...
متن کاملFabrication of vertical thin-GaN light-emitting diode by low-temperature Cu/Sn/Ag wafer bonding
Vertical thin-GaN LED was successfully fabricated on the GaN LED epi-layers grown on the patternedsapphire substrate with the pyramidal pattern by low-temperature Cu/Sn/Ag wafer bonding at 150 C. An inverted pyramidal pattern formed on the n-GaN surface after the GaN epi-layer was transferred onto Si wafer, which resulted from the pyramidal pattern on the patterned-sapphire substrate. The inver...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2015
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.mi201414