Aerodynamic simulation of plunging airfoil with heat effects and Lattice Boltzmann technique
نویسندگان
چکیده
منابع مشابه
Numerical Study of the Aerodynamic Characteristics of a Plunging Rigid Airfoil with Elastic Trailing-Edge Plate
The fluid-structure coupling process of a plunging rigid airfoil with a thin elastic plate attached at the trailing-edge is simulated numerically by using unsteady potential flow source/vortex panel method and the Euler-Bernoulli beam vibration differential equation. The flow characteristics, the unsteady aerodynamic loads, especially the thrust effects of the plunging motion are computed. The ...
متن کاملLattice Boltzmann Simulation of Nanofluids Natural Convection Heat Transfer in Concentric Annulus (TECHNICAL NOTE)
Abstract This study is applied Lattice Boltzmann Method to investigate the natural convection flow utilizing nanofluids in a concentric annulus. A numerical strategy presents for dealing with curved boundaries of second order accuracy for both velocity and temperature fields. The fluid between the cylinders is a water-based nanofluid containing different types of nanoparticles: copper (Cu), a...
متن کاملNumerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow
This paper deals with the hydrodynamic and thermal analysis of a new type of porous heat exchanger (PHE). This system operates based on energy conversion between gas enthalpy and thermal radiation. The proposed PHE has one high temperature (HT) and two heat recovery (HR1 and HR2) sections. In HT section, the enthalpy of flowing high temperature gas flow that is converted to thermal radiation em...
متن کاملSimulation of Micro-Channel and Micro-Orifice Flow Using Lattice Boltzmann Method with Langmuir Slip Model
Because of its kinetic nature and computational advantages, the Lattice Boltzmann method (LBM) has been well accepted as a useful tool to simulate micro-scale flows. The slip boundary model plays a crucial role in the accuracy of solutions for micro-channel flow simulations. The most used slip boundary condition is the Maxwell slip model. The results of Maxwell slip model are affected by the ac...
متن کاملAirfoil Thickness Effects on the Thrust Generation of Plunging Airfoils
Anumerical study was conducted to investigate the effects of airfoil thickness on the thrust generation of plunging airfoils and to assess the contributions of pressure and viscous forces in flapping propulsion. A series of NACA symmetric airfoils with thickness ratio ranging from 4.0% to 20.0% of the airfoil chord length were used in the present study to undertake a same sinusoid plunging moti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal for engineering modelling
سال: 2022
ISSN: ['1330-1365', '1849-8671']
DOI: https://doi.org/10.31534/engmod.2022.1.ri.01v