AE Simulation of Fiber Reinforced Composite Materials.
نویسندگان
چکیده
منابع مشابه
Machinability of glass fiber reinforced plastic (GFRP) composite materials
This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...
متن کاملEnergy Systems and Crushing Behavior of Fiber Reinforced Composite Materials
Effect of geometry on crushing behavior, energy absorption and failure mode of woven roving jute fiber/epoxy laminated composite tubes were experimentally studied. Investigations were carried out on three different geometrical types of composite tubes (circular, square and radial corrugated) subjected to axial compressive loading. It was observed in axial crushing study that the load bearing ca...
متن کاملFiber reinforced plastic composites using recycled materials
This work investigates the feasibility of using recycled high density polyethylene (rHDPE), recycled polypropylene (rPP) and old newsprint fiber (ONP) to manufacture fiber reinforced composites. The boards were made through air-forming and hot press. The effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملNumerical Evaluation of Single Fiber Motion for Short-fiber-reinforced Composite Materials Processing
This paper presents a computational approach for simulating the motion of a single fiber suspended within a viscous fluid. We develop a Finite Element Method (FEM) for modeling the dynamics of a single rigid fiber suspended in a moving fluid. Our approach seeks solutions using the Newton-Raphson method for the fiber’s linear and angular velocities such that the net hydrodynamic forces and torqu...
متن کاملAdvanced AE Techniques in Composite Materials Research
Advanced, waveform based acoustic emission (AE) techniques have been successfully used to evaluate damage mechanisms in laboratory testing of composite coupons. An example is presented in which the initiation of transverse matrix cracking was monitored. In these tests, broad band, high fidelity acoustic sensors were used to detect signals which were then digitized and stored for analysis. Analy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan)
سال: 1998
ISSN: 0371-0580,1880-1994
DOI: 10.4188/transjtmsj.51.3_p150