Advanced Nonflammable Localized High?Concentration Electrolyte For High Energy Density Lithium Battery
نویسندگان
چکیده
The key to realize long-life high energy density lithium batteries is exploit functional electrolytes capable of stabilizing both voltage cathode and anode. emergence localized high-concentration (LHCEs) shows great promise for ameliorating the above-mentioned interfacial issues. In this work, a difluoro(oxalate)borate (LiDFOB) based nonflammable dual-anion LHCE designed prepared. Dissolving in mixture trimethyl phosphate (TMP) /1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (D2), continuously consumption LiDFOB suppressed by simply introducing nitrate (LiNO3). Meantime, as most TMP molecular are coordinated with Li+, electrolyte does not show incompatibility issue between neither metal nor graphite Therefore, it demonstrates excellent capability interface Ni-rich regulating deposition morphology. Li||LiNi0.87Co0.08Mn0.05O2 (NCM87) exhibit capacity retention more than 90% after 200 cycles even under cutoff 4.5 V, 1 C rate. This study offers prospective method develop safe suitable applications, thus providing higher densities.
منابع مشابه
Advanced High-Voltage Aqueous Lithium-Ion Battery Enabled by "Water-in-Bisalt" Electrolyte.
A new super-concentrated aqueous electrolyte is proposed by introducing a second lithium salt. The resultant ultra-high concentration of 28 m led to more effective formation of a protective interphase on the anode along with further suppression of water activities at both anode and cathode surfaces. The improved electrochemical stability allows the use of TiO2 as the anode material, and a 2.5 V...
متن کاملHigh Efficiency Electrolyte Lithium Battery and RF Characterization
The dielectric properties and ionic conductivity of novel "ceramic state" polymer electrolytes for high capacity lithium battery are characterized by Radio frequency and Microwave methods in two broad frequency ranges from 50 Hz to 20 KHz and 4 GHz to 40 GHz. This innovative solid polymer electrolyte which is highly ionic conductive (10 S/cm at room temperature) from -40C to +150C can be used i...
متن کاملAmbipolar zinc-polyiodide electrolyte for a high-energy density aqueous redox flow battery
Redox flow batteries are receiving wide attention for electrochemical energy storage due to their unique architecture and advantages, but progress has so far been limited by their low energy density (~25 Wh l(-1)). Here we report a high-energy density aqueous zinc-polyiodide flow battery. Using the highly soluble iodide/triiodide redox couple, a discharge energy density of 167 Wh l(-1) is demon...
متن کاملGCEP Report - external Project title : Self - Healing Polymers for High - Energy - Density Lithium Ion Battery Investigators
In this report, we describe our continuing work towards development of high-performance lithium-ion batteries through self-healing polymer approach. In the past year, we continued with designing and synthesizing a series of self-healing polymers and elastomers with different mechanical properties and self-healing capabilities. Further comparison of the battery cycling will give a deeper underst...
متن کاملSilicon carbide-free graphene growth on silicon for lithium-ion battery with high volumetric energy density
Silicon is receiving discernable attention as an active material for next generation lithium-ion battery anodes because of its unparalleled gravimetric capacity. However, the large volume change of silicon over charge-discharge cycles weakens its competitiveness in the volumetric energy density and cycle life. Here we report direct graphene growth over silicon nanoparticles without silicon carb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy & environmental materials
سال: 2022
ISSN: ['2575-0348', '2575-0356']
DOI: https://doi.org/10.1002/eem2.12246