Advanced Cavity-Core System Mold for Ultra Low Pressure Injection Molding.
نویسندگان
چکیده
منابع مشابه
Development of an Intelligent Cavity Layout Design System for Injection Molding Dies (RESEARCH NOTE)
This paper presents the development of an Intelligent Cavity Layout Design System (ICLDS) for multiple cavity injection moulds. The system is intended to assist mould designers in cavity layout design at concept design stage. The complexities and principles of cavity layout design as well as various dependencies in injection mould design are introduced. The knowledge in cavity layout design is ...
متن کاملStudy on the Mold Temperature Control for the Core Plate during Injection Molding Process
Abstract: During injection molding process, the mold temperature is one of the most important influences on the product quality. In this paper, the temperature of the core plate with the size of 100 mm × 100 m × 40 mm will be examined for different product sizes. Different types of heating and cooling channels are inserted in the core plate. The size of the plastic product will be changed from ...
متن کاملInvestigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملDesign of a Wireless Sensor for Injection Molding Cavity Pressure Measurement
The concept of a wireless sensor for injection molding machine cavity pressure measurement is proposed. The pressure information inside the cavity can be sensed by means of a series of ultrasonic pulses. The current pressure is obtained simply multiplying the number of pulses with a preset threshold value. Instead of using any external power supply, the sensor is self-powered by a piezoelectric...
متن کاملInformation System for Injection Molding Tools
Tools for injection molding are very expensive parts of this kind of production and they must be handled very carefully. An important part of their handling is the management of data related to the tools. The important data for injection molding tools is possible divide to different areas economical, technological, production etc. With an increasing impact of information technologies on manufac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Seikei-Kakou
سال: 1997
ISSN: 1883-7417,0915-4027
DOI: 10.4325/seikeikakou.9.123