Adsorptive Removal of Phosphate from Water by Ammonia Gas Activated Polyacrylonitrile Fiber
نویسندگان
چکیده
منابع مشابه
Adsorptive removal of phosphate from wastewater using mesoporous titanium oxide
The adsorption of phosphate onto mesoporous TiO2 was investigated in order to reduce phosphorus concentrations in wastewater and provide a potential mode of phosphorus recovery. Three equilibrium isotherms were used to optimize and properly describe phosphate adsorption (R > 0.95). The maximum capacity of phosphate on the adsorbent was found to be 50.4 mg/g, which indicated that mesoporous TiO2...
متن کاملPolysulfone/Iron Oxide Nanoparticles Ultrafltration Membrane for Adsorptive Removal of Phosphate from Aqueous Solution
Excessive nutrient contents in water bodies renders eutrophication and causes undesired structural changes to the environment. One of the most straightforward strategies to address eutrophication issue is through the removal of nutrients such as phosphate ions from the water sources. A combination of membrane fltration and adsorption process is an attractive alternative...
متن کاملEfficiency of Powdery Activated carbon in Ammonia-Nitrogen Removal from Aqueous Environments (Response Surface Methodology)
Background & Aims of the Study: Nitrogenous compounds could directly create many problems for human's health and the environment. Thus, removal of nitrogenous compounds is necessary. Among the most important problems, decreasing dissolved oxygen, toxicity for aquatics, eutrophication, converting aerobic medium into anaerobic one and corrosion could be noted. The aim of this stu...
متن کاملRemoval of Methylene Blue from Water by Polyacrylonitrile Co Sodium Methallylsulfonate Copolymer (AN69) and Polysulfone (PSf) Synthetic Membranes
Polyacrylonitrile-co-sodium methallylsulfonate copolymer (AN69) and polysulfone (PSf) synthetic membranes were prepared and used for the removal of methylene blue (MB) from water. Atomic Force Microscopy (AFM), Ionic exchange capacity (IEC), and Swelling ratio (Sr) were employed to determine the membrane characteristics. pH, membrane composition and initial dye concentration were used for t...
متن کاملAdsorptive Removal of Cr(VI) from Water by Anion Exchanger Based Nanosized Ferric Oxyhydroxide Hybrid Adsorbent
A hybrid adsorbent (FOAE) prepared by loading ferric oxyhydroxide on anion exchanger was applied for adsorptive removal of Cr(VI) from water. Effects of initial Cr(VI) concentration, pH, temperature and competition of other anions on Cr(VI) adsorption were investigated in batch experiments. The equilibrium adsorption capacity (Qe) of the FOAE increased with initial Cr(VI) concentrations (from 2...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fiber Science and Technology
سال: 2016
ISSN: 2189-7654
DOI: 10.2115/fiberst.fiberst.2016-0035