Adsorption of Nickel on Electric Arc Furnace Slag: Batch and Column Studies
نویسندگان
چکیده
منابع مشابه
Electric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
متن کاملFatigue Behavior Analysis of Asphalt Mixes Containing Electric Arc Furnace (EAF) Steel Slag
This research was conducted in order to evaluate fatigue behavior of asphalt mixes containing Electric Arc Furnace (EAF) steel slag. After initial evaluation of the properties of EAF steel slag using X-ray Diffraction (XRD) and Scanning Electric Microscope (SEM), six sets of laboratory mixtures were prepared. Each set were treated replacing various portions of limestone aggregates of the mix wi...
متن کاملThe Phase Composition of Electric Furnace Slag
Elementary and phase composition as well as micrography of the electric furnace slag were examined. The base of slag is made from phases containing Fe, Mn and Ca. Grains differ in size and shape, they cling together to form bigger or smaller agglomerates, depending on separated fractions. Relative distribution of identified phases in separated fractions is presented and the possibility of phase...
متن کاملfatigue behavior analysis of asphalt mixes containing electric arc furnace (eaf) steel slag
this research was conducted in order to evaluate fatigue behavior of asphalt mixes containing electric arc furnace (eaf) steel slag. after initial evaluation of the properties of eaf steel slag using x-ray diffraction (xrd) and scanning electric microscope (sem), six sets of laboratory mixtures were prepared. each set were treated replacing various portions of limestone aggregates of the mix wi...
متن کاملInfluence of Mechanically Activated Electric Arc Furnace Slag on Compressive Strength of Mortars Incorporating Curing Moisture and Temperature Effects
In this study, the influence of mechanically activated electric arc furnace slag (EAFS) was investigated through compressive strength tests on 50 mm mortar cubes. The objective was to convert the wasteful EAFS into a useful binding material to reduce the cement content in concrete without compromising strength and economy. Four different groups of mortar were cast which include control mortar, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Separation Science and Technology
سال: 2014
ISSN: 0149-6395,1520-5754
DOI: 10.1080/01496395.2013.843099