Adsorption of iron(III) on Amberlite XAD resins from hydrochloric acid solution.
نویسندگان
چکیده
منابع مشابه
Preconcentration of lead with Amberlite XAD-2 and Amberlite XAD-7 based chelating resins for its determination by flame atomic absorption spectrometry.
Four chelating matrices prepared by coupling Amberlite XAD-2 with chromotropic acid (AXAD-2-CA or 1), pyrocatechol (AXAD-2-PC or 2) and thiosalicylic acid (AXAD-2-TSA or 3) through azo spacer and impregnation of Amberlite XAD-7 with xylenol orange (AXAD-7-XO or 4) have been studied for enrichment of lead(II). All the four resins quantitatively sorb Pb(II) at pH 3.0-8.0 when the flow rate is mai...
متن کاملLithium adsorption by acid and sodium amberlite.
In this paper we used a previously reported model for examining the adsorption of nonelectrolytes in solution by solid adsorbents to study the adsorption of lithium(I) cations by acid and sodium amberlites, which is an ion-exchange process. Based on the results, both are equilibrium processes and obey a kinetic law with a unity partial order in the Li+ concentration. The kinetic results were us...
متن کاملRemoval of Acid-soluble Lignin from Biomass Extracts Using Amberlite Xad-4 Resin
This paper describes a method for the removal of acid-soluble lignin from acid-hydrolyzed hemicelluloses extracted from a mixture of northern US hardwood chips, by using Amberlite XAD-4 resin, which was shown to remove 100% of furan derivatives and 90% of acid-soluble lignin. Subsequent fermentation of the resin-treated hydrolyzates gave ethanol yields as high as 97% of theoretical and showed a...
متن کاملAdsorption characteristics of as(III) and as(V) with titanium dioxide loaded Amberlite XAD-7 resin.
The adsorption characteristics of As(V) and As(III) on titanium dioxide loaded Amberlite XAD-7 resin have been studied. The resin was prepared by impregnation of Ti(OC2H5)4 followed by hydrolysis with ammonium hydroxide. Batch adsorption experiments were carried out as a function of the pH, shaking time and the concentration of As(V) and As(III) ions. The resin showed a strong adsorption for As...
متن کاملSurface roughness of composite resins subjected to hydrochloric acid.
The purpose of this study was to determine the influence of hydrochloric acid on surface roughness of composite resins subjected to brushing. Sixty samples measuring 2 mm thick x 6 mm diameter were prepared and used as experimental units. The study presented a 3x2 factorial design, in which the factors were composite resin (n=20), at 3 levels: microhybrid composite (Z100), nanofilled composite ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Analytical Sciences
سال: 1985
ISSN: 0910-6340,1348-2246
DOI: 10.2116/analsci.1.289