Adsorption of Fluoride from Aqueous Solution Using Low-Cost Bentonite/Chitosan Beads
نویسندگان
چکیده
منابع مشابه
Adsorption of Copper from Aqueous Solution Using Low- Cost Adsorbent
In this study activated carbon prepared from Adathoda vasica stem was used as adsorbent to remove Cu from an industrial waste water. For this purpose, high grade CuSO4.5H2O was used as heavy metal sample. Laboratory experimental investigation was carried out to identify the effect of pH (1.50 – 5.5), agitation time (30-240 min) varying temperature (30-50 ̊C) and varying biomass quantities (2,4,6...
متن کاملA Review on Adsorption of Fluoride from Aqueous Solution
Fluoride is one of the anionic contaminants which is found in excess in surface or groundwater because of geochemical reactions or anthropogenic activities such as the disposal of industrial wastewaters. Among various methods used for defluoridation of water such as coagulation, precipitation, membrane processes, electrolytic treatment, ion-exchange, the adsorption process is widely used. It of...
متن کاملADSORPTION STUDY OF Cr(VI) FROM AQUEOUS SOLUTION USING ANIMAL BONE CHARCOAL AS LOW COST ADSORBENT
Animal bone charcoal (ABC) produced from animal bones was used as adsorbent to remove Cr(VI) from its aqueous solution . Labority experimental investigation was carried out to identify the effect of contact of time, pH, adsorbent dose and initial concentration on the adsorption of chromium from metal solution. Results showed that pH 2 was the most suitable, while the removal of Cr(VI) ions with...
متن کاملRemoval of Basic Blue 159 from Aqueous Solution Using Banana Peel as a Low-Cost Adsorbent
In this paper, the adsorption of Basic Blue159 (BB159) onto banana peel as a low-cost material was studied. At first, the banana peel was sieved. Later, banana peel particles were characterized by field emission scanning electron microscopy (FESEM), energy dispersive x-ray spectroscopy (EDXS) and Fourier Transform Infrared (FTIR) techniques. Batch adsorption experiments were carried out as a fu...
متن کاملApplication of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites
Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was performed by response surface modelingwith the help of Minitab 16 software. The effect of independent ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Analytical Chemistry
سال: 2013
ISSN: 2156-8251,2156-8278
DOI: 10.4236/ajac.2013.47a007