ADSORPTION OF Cr(VI) FROM AQUEOUS SOLUTION USING CARBON-MICROSILICA COMPOSITE ADSORBENT

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Removal of methylene blue from aqueous solution by a carbon - microsilica composite adsorbent

−Microsilica, one kind of industrial solid waste material, was utilized firstly to prepare a carbon-microsilica composite adsorbent (CMS). The prepared adsorbent was characterized with XPS, SEM and Gas sorption experiments. The results indicated the SO 3 H groups, which are very effective in capturing cationic organic dye, were introduced onto the surface of CMS; the Brunauer-Emmett-Teller (BET...

متن کامل

Adsorption of Copper from Aqueous Solution Using Low- Cost Adsorbent

In this study activated carbon prepared from Adathoda vasica stem was used as adsorbent to remove Cu from an industrial waste water. For this purpose, high grade CuSO4.5H2O was used as heavy metal sample. Laboratory experimental investigation was carried out to identify the effect of pH (1.50 – 5.5), agitation time (30-240 min) varying temperature (30-50 ̊C) and varying biomass quantities (2,4,6...

متن کامل

Adsorption of 4-chlorophenol from aqueous solution using activated carbon synthesized from aloe vera green wastes

In this study, activated carbon synthesized from Aloe vera green wastes was used as a sorbent to remove 4-chlorophenol (4-CP) from aqueous solutions. The influence of contact time (0-100 minutes), pH (2-8), adsorbent dosage (1-9 g/l), and initial 4-CP concentration (10-60 mg/l) in batch system was investigated on the sorption. The sorbent was specified using scanning electron microscopy (SEM). ...

متن کامل

Removal of chromium (VI) from aqueous solution by adsorption using cousinia eryngioides boiss and activated carbon

Adsorption capacity of Cr (VI) onto cousinia eryngioides boiss, activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH, temperature, agitation speed, absorbent dose and particle size. Cr (VI) removal is pH dependent and found to be maximum at pH 2.0. The amounts of Cr (VI) adsorbed increased with increase...

متن کامل

Adsorption of nitrate from aqueous solution using activated carbon-supported Fe0, Fe2 (SO4)3, and FeSO4

In this laboratory scale study, impregnated almond shell activated carbon was used as adsorbent to investigate its feasibility for nitrate adsorption from aqueous medium. The effects of activated carbon dosage and contact time have been examined in batch experiments. Experimental data show that impregnated activated carbons by Fe0, Fe2 (SO4)3, and FeSO4 were more effective than virgin almond ac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Chilean Chemical Society

سال: 2012

ISSN: 0717-9707

DOI: 10.4067/s0717-97072012000100002