Adsorption of 1,2-dichloropropane from aqueous solution
نویسندگان
چکیده
منابع مشابه
Adsorption of Lead from Aqueous Solution by Modified Beech Sawdust
Sawdust is now being investigated as an adsorbent to remove contaminants from aqueous solution. Heavy metals can be decreased very effectively with the organic material. In this research, adsorption of Pb (II) onto modified beech sawdust in a batch system was investigated. Sawdust was collected from timber mill of Qom, Iran, and modified with H2SO4 and NaOH. Then, the effe...
متن کاملAdsorption of chloroform from aqueous solution by nano -TiO2
In this study, nano-TiO2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. The effects of pH, initial chloroform concentration and nano-TiO2 dosage were also investigated. Optimal conditions for chloroform removal by nano-TiO2 have been then identified. Results of equilibrium experiments showed that the...
متن کاملAdsorption of chloroform from aqueous solution by nano -TiO2
In this study, nano-TiO2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. The effects of pH, initial chloroform concentration and nano-TiO2 dosage were also investigated. Optimal conditions for chloroform removal by nano-TiO2 have been then identified. Results of equilibrium experiments showed that the...
متن کاملCarmine Adsorption from Aqueous Solution by Crosslinked Peanut Husk
To observe the feasibility of the removal of carmine, peanut husk, an agriculture by-product, was crosslinked with epichlorohydrin in alkaline medium and used for adsorption of carmine from aqueous solution. Batch experiments were carried out to study the effects of various parameters such as initial pH, contact time, adsorbent dosage and initial carmine concentration, as ...
متن کاملAdsorption of Copper from Aqueous Solution Using Low- Cost Adsorbent
In this study activated carbon prepared from Adathoda vasica stem was used as adsorbent to remove Cu from an industrial waste water. For this purpose, high grade CuSO4.5H2O was used as heavy metal sample. Laboratory experimental investigation was carried out to identify the effect of pH (1.50 – 5.5), agitation time (30-240 min) varying temperature (30-50 ̊C) and varying biomass quantities (2,4,6...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PJCT
سال: 2007
ISSN: 1899-4741,1509-8117
DOI: 10.2478/v10026-007-0021-z