Adsorption Batch Studies on the Removal of Pb(II) Using Maize Tassel Based Activated Carbon

Adsorption Studies on the Removal of Pesticides(Carbofuran) using Activated Carbon from Rice Straw Agricultural Waste

In this study, we used a two-stage process and potassium hydroxide (KOH) to transform waste biomass (rice straw) into activated carbon and then evaluated the adsorption capacity of the waste for removing carbofuran from an aqueous solution. Activated carbon was fast and effective for the removal of carbofuran because of its high surface area. The native and carbofuran-loaded adsorbents were cha...

Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells

Landfills generate leachate that contains elevated concentration of contaminants and is hazardous to human health and the ecosystem. In this study, the mixture of granular activated carbon and cockle shells was investigated for remediation of COD and ammonia from stabilized landfill leachate. All adsorbent media were sieved to a particle size between 2.00 and 3.35 mm. The optimum mixing ratio, ...

Removal of Paracetamol on Biomass - Derived Activated 1 Carbon : Modeling the Fixed Bed Breakthrough Curves Using 2 Batch Adsorption Experiments

Kinetic and thermodynamic studies of the removal of murexide from aqueous solutions on to activated carbon

The objective of this study was to assess the adsorption potential of activated carbon (AC) asan adsorbent for the removal of Murexide (Mu) from aqueous solutions. The influence of variablesparameters including pH, amount of adsorbent, sieve size of adsorbent, temperature and contact timeon Mu removal was studied. Following optimization of variables, the relation between concentrations ofdye re...

Batch studies of adsorption of copper and lead on activated carbon from Eucalyptus camaldulensis dehn. bark.

Powdered activated carbon (PAC) prepared from Eucalyptus camaldulensis Dehn. bark was tested for its adsorption capacity for Cu(II) and Pb(II). The experiment was conducted to investigate the effects of pH, contact time, initial metal concentration, and temperature. The best adsorption of both Cu(II) and Pb(II) occurred at pH 5, where the adsorption reached equilibrium within 45 min for the who...