Admittance of CdS nanowires embedded in porous alumina template
نویسندگان
چکیده
منابع مشابه
Electrostatic capacitance of TiO2 nanowires in a porous alumina template
Titanium oxide (TiO2) nanowires were prepared for an electrolytic capacitor application by the automatic dipping technique using a porous alumina template. The automatic dipping technique allows us to exactly control the dipping rate so that we can obtain homogenous infiltration of nanowires in the porous alumina membrane, even though the solution is very acidic. From the TEM, SEM and XRD measu...
متن کاملProperties of Ni and Ni–Fe nanowires electrochemically deposited into a porous alumina template
The comparative analysis of the electrochemical deposition of Ni and Ni-Fe nanowires (NWs) into ordered porous alumina templates is presented. The method developed allows for obtaining NWs of 50 ± 5 nm in diameter and 25 μm in length, i.e., with an aspect ratio of 500. XRD data demonstrate the polycrystalline nature of Ni and Ni-Fe in a face-centered cubic close-packed lattice. Both fabricated ...
متن کاملElectrochemical fabrication of Cu/Pd multilayer nanowires in polycarbonate template
In this work,copper/palladium (Cu/Pd) multilayer nanowires were successfully prepared by electrodeposition method using polycarbonate template. The fabrication of Pd/Cu multilayer nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The morphological properties of the nanowires were studied by scanning electron microscopy (SEM) and resu...
متن کاملThe synthesis of alumina nanowires on the surface of a porous alumina membrane
Porous aluminum oxide membranes with a complete and even covering of alumina nanowires were formed in a one-step anodization process in dilute phosphoric acid electrolyte. The anodizing conditions can be adjusted to start forming alumina wires that originate on the surface of the porous alumina layer at the triple junction points (the edges of the hexagonal inter-pore structure where three pore...
متن کاملOne-dimensional embedded cluster approach to modeling CdS nanowires.
We present an embedded cluster model to treat one-dimensional nanostructures, using a hybrid quantum mechanical/molecular mechanical (QM/MM) approach. A segment of the nanowire (circa 50 atoms) is treated at a QM level of theory, using density functional theory (DFT) with a hybrid exchange-correlation functional. This segment is then embedded in a further length of wire, treated at an MM level ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2006
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.2185729