Adhesive hardening and plasticity in bonded joints

Reliability analysis of bonded joints with variations in adhesive thickness

Thermal Stress in Bonded Joints

This paper considers the stress distributions in bonded materials induced by differential expansion or contraction of these materials. The analytical approach is similar to the lap joint theories attributed to Volkersen and expanded by Goland and Reissner. Several simple and typical analytical models are presented to bring out the relative importance of dlrerent geometrical and material paramet...

Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive

A mesh independent continuum damage model has been proposed to predict the residual strength of adhesively bonded joints by introducing a displacement-based damage parameter into the constitutive equation of damaged materials. Joints bonded with a ductile adhesive EA9321 were studied for a range of environmental degradation. The moisture dependent damage parameter for EA9321 was calibrated usin...

Monitoring of Disbonding in Bonded Composite Joints Using Cfbg Sensors Embedded within the Adhesive Bondline

Chirped fibre Bragg grating (CFBG) sensors have been embedded within the adhesive bondline of single-lap bonded composite joints, fabricated using a transparent glass fibre reinforced plastic (GFRP) adherend bonded to a carbon fibre reinforced plastic (CFRP) adherend. During fatigue cycling, disbonds initiated adjacent to the cut ends of one, or both, of the adherends and the disbonds propagate...

Cohesive Zone Modeling of Mode I Fracture in Adhesive Bonded Joints

This paper deals with the application of Cohesive Zone Model (CZM) concepts to study mode I fracture in adhesive bonded joints. In particular, an intrinsic piece-wise linear cohesive surface relation is used in order to model fracture in a pre-cracked bonded Double Cantilever Beam (DCB) specimen. Finite element implementation of the CZM is accomplished by means of the user element (UEL) feature...