Adhesive bonding of beech wood modified with a phenol formaldehyde compound
نویسندگان
چکیده
منابع مشابه
Development and characterization of groundnut shell lignin modified phenol formaldehyde wood adhesive
Lignin modified phenol formaldehyde wood adhesives have been prepared by replacing phenol with the groundnut shell lignin (GNSL) at varying weight percentages. The optimization of weight percent incorporation of GNSL was carried out in respect to mechanical properties. It was found that a maximum of up to 50 wt.% of phenol in the phenol formaldehyde (PF) adhesive can be substituted by GNSL to o...
متن کاملWater-resistant Whey Protein Based Wood Adhesive Modified by Post-treated Phenol-formaldehyde Oligomers (pfo)
With the attempt to develop an environmentally safe whey protein-based adhesive with good water resistance, a low-molecular-weight PFO was used as a modifier, and the effects of scavengers on the formaldehyde emission and bond properties were investigated. Plywood evaluation and HPLC analysis indicated that the PFO synthesized with a low content of sodium hydroxide as a catalyst (NaOH/phenol mo...
متن کاملSynthesis of Humin-Phenol-Formaldehyde Adhesive
Humins are low-value-added byproducts from the biomass acid hydrolysis process. In the present work, humins were first employed as a phenol replacement for synthesis of modified phenol-formaldehyde adhesives through a two-step process. In this process, humins were first utilized to obtain alkaline soluble products, mainly consisting of phenolics, through a hydrothermal process. The obtained alk...
متن کاملAdhesive Bonding of Wood Materials
Adhesion to Wood 9–1 Surface Properties of Wood Adherends 9–2 Extractives on Surfaces 9–3 Knifeand Abrasive-Planed Surfaces 9–3 Veneer Surfaces 9–4 Surfaces of Wood and Nonwood Composite Products 9–5 Physical Properties of Wood Adherends 9–6 Density and Porosity 9–6 Moisture Content and Dimensional Changes 9–7 Adhesives 9–9 Composition 9–9 Health and Safety 9–10 Strength and Durability 9–10 Adh...
متن کاملCompatibility of nonacidic waterborne preservatives with phenol-formaldehyde adhesive
Thirteen nonacidic waterborne preservatives were in vestigated for their compatibilitywith phenol-formaldehyde adhesive on aspen veneer treated with the preservatives to retentions of 0.2, 0.4, and 0.6 pcf. Of these preserva tives, didecyl dimethyl ammonium chloride (DDAC),DDAC with copper, DDAC with carbamate (DDACCA),sodium fluoride,and ammonium hydrogen difluoridedid not inter fere with a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: European Journal of Wood and Wood Products
سال: 2012
ISSN: 0018-3768,1436-736X
DOI: 10.1007/s00107-012-0620-0