Adenine as Epoxy Resin Hardener for Sustainable Composites Production with Recycled Carbon Fibers and Cellulosic Fibers
نویسندگان
چکیده
منابع مشابه
The Resistivity of Carbon Fibers /abs Resin Composites
Polymers filled with conductive particles and fibers have been widely used in electromagnetic interference (EMI) shielding, electrical static discharge (ESD), and other regions. In these combinations, the carbon fibers filled polymer composites are special interest due to their excellent mechanical properties and high conductivity as well as good durability to environmental conditions. However,...
متن کاملThermal Degradation of HDPE Short Fibers Reinforced Epoxy Composites
Thermogravimetric analysis was carried out to investigate the thermal degradation of High Density Poly Ethylene (HDPE) short fibers reinforced epoxy composites. Three composites with 5, 10 and 15 % by weight of HDPE short fiber composition were prepared using epoxy as matrix material. The HDPE short fiber used as reinforcing material into the resin helps in retarding the thermal degradation of ...
متن کاملBio-composites from Canola Oil Based Resin and Hemp Fibers
INTRODUCTION The environmental concerns, including dwindling crude oil resources, high oil prices, pollution, greenhouse CO2 emissions, and toxicity in the environment, married to societal pressures towards sustainable development are currently making countries around the world turn to biomass as a renewable resource for a variety of products: fuels, lubricants, chemicals, polymers, fibers, neu...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملUtilization of recycled post consumer carpet waste fibers as reinforcement in lightweight cementitious composites
Purpose – A large amount of post-consumer carpet waste is discarded into landfills. The need to recycle this waste is increasing due to the lack of available landfill spaces in many parts of the world, environmental concerns, and resource conservation. The purpose of this paper is to explore the use of this waste for a low-cost, high-volume application. Design/methodology/approach – Fibers from...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2020
ISSN: 2073-4360
DOI: 10.3390/polym12123054