Addressing the permanent deformation behavior of hot mix asphalt by triaxial cyclic compression testing with cyclic confining pressure
نویسندگان
چکیده
منابع مشابه
EVALUATING HOT DEFORMATION BEHAVIOR OF W360 TOOL STEEL BY HOT COMPRESSION TEST
In this research, the hot deformation behavior of W360 tool steel was investigated using hot compression test at 1000-1200°C and strain rates of 0.001, 0.01, 0.1, and 1 s-1. According to the results, dynamic recrystallization was found the most important restoration factor of this alloy during hot deformation. Recrystallization was enhanced with an increase in temperature and strain rate. Also,...
متن کاملbehavior of rockfill materials in triaxial compression testing
this paper studies thoroughly and deeply the results of about one hundred triaxial compression tests on thirty types of rockfill materials. the materials are categorized in accordance with their particles shape (angular / rounded) and gradation characteristics. the main tool of the study is the hyperbolic model developed by duncan and chang. the focus of the study is on the variations of deform...
متن کاملInfrared Thermography Revolutionizes Hot-Mix Asphalt Paving
Hot-mix asphalt (HMA) surfaces comprise about 90% of the highways and roads in the U.S. Highways and are typically engineered to last 15 years or more, but many have been failing early due to potholes, cracks, raveling, and other problems. This premature road failure unnecessarily wastes millions of taxpayer dollars every year. This paper describes a series of research studies that were conduct...
متن کاملEvaluating the Performance of Hot Mix Asphalt with Reclaimed Asphalt Pavement and Heavy Vacuum Slops as Rejuvenator
Due to the high price of crude oil, and consequently asphalt binder, the application of Reclaimed Asphalt Pavement (RAP) in pavement technology is widely considered. The present paper is the result of a laboratory research which was carried out to investigate the effects of adding a rejuvenating agent to Hot Mix Asphalt (HMA) with RAP. To this end, test samples comprised of Aged Asphalt Binder ...
متن کاملHot Deformation Behavior of Haynes 25 by the Hot Tensile Test
In the present work, hot tensile behavior of Haynes 25 Co-base alloy was investigated in the temperature range of 950-1200 ˚C and 0.1 s-1. Thermodynamic calculations showed that M23C6 and M6C carbides were stable below 1000 ˚C and above 1050 ˚C, respectively. Stress-strain curves also indicated an unusual trend of strain fracture. It was observed that with increasing temperature from 950 to 105...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Traffic and Transportation Engineering (English Edition)
سال: 2015
ISSN: 2095-7564
DOI: 10.1016/j.jtte.2015.01.002