Additive manufacturing of soft and hard magnetic materials

Computed tomography characterisation of additive manufacturing materials.

Additive manufacturing, covering processes frequently referred to as rapid prototyping and rapid manufacturing, provides new opportunities in the manufacture of highly complex and custom-fitting medical devices and products. Whilst many medical applications of AM have been explored and physical properties of the resulting parts have been studied, the characterisation of AM materials in computed...

Additive manufacturing of fatigue resistant materials: Challenges and opportunities

Apfim and Hrem Studies of Nanocomposite Soft and Hard Magnetic Materials

Fe or Co based alloys with nanocrystalline microstructure show excellent permeability because the net magnetocrystalline anisotropy is significantly reduced when the grain size becomes smaller than the ferromagnetic exchange length. Fe-Si-B-Nb-Cu alloy is the pioneering nanocrystalline soft magnetic material invented by Yoshizawa et al. in 1988 [1]. Our previous works [2,3] reported evidence fo...

Permanent magnets and hard magnetic materials

This review deals with the definition and development of hard magnetic materials with special emphasis on more recent developments in this field. After discussing the fundamental properties of all hard magnetic materials, based on the intrinsic and extrinsic properties, some remarks on the history of hard magnetic materials and permanent magnets are given. The important hard ferrites are only b...

Additive manufacturing methods and materials for electrokinetic systems

Fabrication of miniaturized devices is usually time-consuming, costly, and the materials commonly used limit the structures that are possible to create. The techniques most often used to make microsystems involve multiple steps, where each step takes considerable time, and if only a few systems are to be made, the price per device becomes excessive. This thesis describes how a simple syringebas...