Additive manufacturing of polyether ether ketone – PEEK parts with surface roughness modification by a laser beam
نویسندگان
چکیده
منابع مشابه
Reduction of Surface Roughness by Means of Laser Processing over Additive Manufacturing Metal Parts
Optimization of processing parameters and exposure strategies is usually performed in additive manufacturing to set up the process; nevertheless, standards for roughness may not be evenly matched on a single complex part, since surface features depend on the building direction of the part. This paper aims to evaluate post processing treating via laser surface modification by means of scanning o...
متن کاملLocal deformation behavior of surface porous polyether-ether-ketone.
Surface porous polyether-ether-ketone has the ability to maintain the tensile monotonic and cyclic strength necessary for many load bearing orthopedic applications while providing a surface that facilitates bone ingrowth; however, the relevant deformation behavior of the pore architecture in response to various loading conditions is not yet fully characterized or understood. The focus of this s...
متن کاملMean strain effects on cyclic deformation and fatigue behavior of polyether ether ketone (PEEK)
The fatigue behavior of polyether ether ketone (PEEK) thermoplastic was investigated under uniaxial strain-controlled cyclic loading condition with various mean strains (Rε 1⁄4 0, 0.2, and 0.25). The mean stress responses of PEEK from all mean strain fatigue tests were found to be fully-relaxed. As a result, minimum mean strain effect on fatigue behavior of PEEK was observed. Fractography analy...
متن کاملPEEK (Polyether-ether-ketone) Based Cervical Total Disc Arthroplasty: Contact Stress and Lubrication Analysis
This paper presents a theoretical analysis of the maximum contact stress and the lubrication regimes for PEEK (Polyether-ether-ketone) based self-mating cervical total disc arthroplasty. The NuNec(®) cervical disc arthroplasty system was chosen as the study object, which was then analytically modelled as a ball on socket joint. A non-adhesion Hertzian contact model and elastohydrodynamic lubric...
متن کاملNovel Beam Diagnostics Improve Laser Additive Manufacturing
Laser additive manufacturing (LAM) is rapidly becoming an important method for the fabrication of both prototype and production metal parts. However, the technology is really just in its infancy, and significant work still needs to be done in the development of new materials and in understanding how various process parameters affect results. In particular, LAM methods typically have a relativel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Machine Engineering
سال: 2020
ISSN: 1895-7595,2391-8071
DOI: 10.36897/jme/119670