Additive manufacturing of high-performance vinyl ester resin via direct ink writing with UV-thermal dual curing

High-Operating-Temperature Direct Ink Writing of Mesoscale Eutectic Architectures.

High-operating-temperature direct ink writing (HOT-DIW) of mesoscale architectures that are composed of eutectic silver chloride-potassium chloride. The molten ink undergoes directional solidification upon printing on a cold substrate. The lamellar spacing of the printed features can be varied between approximately 100 nm and 2 µm, enabling the manipulation of light in the visible and infrared ...

Light curing of dual cure resin cement

266 This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/ by-nc/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Direct Ink Writing of 3D Functional Materials

New methods for materials fabrication at the microand nanoscale will drive scientific and technological advances in areas of materials science, chemistry, physics, and biology. The broad diversity of potentially relevant materials, length scales, and architectures underscores the need for flexible patterning approaches. One important example is the fabrication of 3D periodic structures comprise...

Poisoning with writing ink.

Curing efficiency of dual-cure resin cement under zirconia with two different light curing units

PURPOSE Adequate polymerization is a crucial factor in obtaining optimal physical properties and a satisfying clinical performance from composite resin materials. The aim of this study was to evaluate the polymerization efficiency of dual-cure resin cement cured with two different light curing units under zirconia structures having differing thicknesses. MATERIALS AND METHODS 4 zirconia discs...