Additive Effect on Sintering of Boron Carbide

Sintering of cubic boron nitride under high pressures and temperatures in the presence of boron carbide as the binding material

Sintering of cubic boron nitride (cBN) was carried out by subjecting fine powders of cBN to high pressures and temperatures (P = 50-60 kb, T = 1200-1500°C ) in the presence of boron carbide as the main binding material together with a small amount of aluminium nitride. The composites were characterized by X-ray diffraction, scanning electron microscopy, FTIR, Raman Spectroscopy and microhardnes...

Boron carbide/n-silicon carbide heterojunction diodes

Sintering boron carbide ceramics without grain growth by plastic deformation as the dominant densification mechanism

A new ceramic sintering approach employing plastic deformation as the dominant mechanism is proposed, at low temperature close to the onset point of grain growth and under high pressure. Based on this route, fully dense boron carbide without grain growth can be prepared at 1,675-1,700 °C and under pressure of (≥) 80 MPa in 5 minutes. The dense boron carbide shows excellent mechanical properties...

effect of oral presentation on development of l2 learners grammar

this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...

Shock-wave strength properties of boron carbide and silicon carbide