Adaptation of a cold vapour mercury analyser to flow injection analysis

Adaptation of a cold vapour mercury analyser to flow injection analysis

Minor modifications to a Coleman MAS-50A Mercury Analyser System allowed the determination of mercury by flow injection analysis. Using sample volumes of 600 mul it was possible to analyse up to 120 samples per hour, with a detection limit of 0.2 mug. l(-1) (120 pg) of mercury. The authors also report on a simple digestion procedure which replaces the time- and reagent-consuming EPA procedure, ...

Automated cold vapour flow-injection analysis of mercury at high concentrations

Continuous-flow cold vapour- atomic fluorescence spectrometry is shown to be an extremely sensitive technique for the determination of mercury with detection limits typically below 0.01 mug l(-1). Linear calibration ranges were found to be at least four orders of magnitude (i.e. up to 0.1 mg l(-1)). Samples with concentrations exceeding the linear range are susceptible to self-absorption, and m...

Operator-free flow injection analyser

A flow injection analyser has been constructed to allow an operator-free determination of up to 40 samples. Besides the usual FIA apparatus, the analyser includes a home-made sample introduction device made with three electromechanical three-way valves and an auto-sampler from Technicon which has been adapted to be commanded by an external digital signal. The analyser is controlled by a single ...

Determination of total mercury in biological tissues by flow injection cold vapour generation atomic absorption spectrometry following tetramethylammonium hydroxide digestion.

A simple, rapid and reliable method was developed for the determination of total mercury in biological samples. Samples were solubilized using tetramethylammonium hydroxide (TMAH). The organically bound mercury was cleaved and converted to inorganic mercury by on-line addition of KMnO4. The decomposed mercury together with inorganic mercury originally present in samples was determined by flow i...

Determination of total mercury in bauxite and bauxite residue by flow injection cold vapour atomic absorption spectrometry