Active Wave Feedforward Control of a Flexible Beam Using Smart Sensors
نویسندگان
چکیده
منابع مشابه
Active Vibration Control of Flexible Beam using Differential Evolution Optimisation
This paper presents the development of an active vibration control using direct adaptive controller to suppress the vibration of a flexible beam system. The controller is realized based on linear parametric form. Differential evolution optimisation algorithm is used to optimize the controller using single objective function by minimizing the mean square error of the observed vibration signal. F...
متن کاملActive Vibration Suppression of a Smart Beam via PID Control
In this study, a PID controller was designed for the active vibration suppression of a smart beam equipped with PZT (Lead-Zirconate-Titanate) patches. The smart beam is a cantilever aluminium beam having eight symmetrically located surface-bonded piezoelectric patches. In this particular application, a group of PZT patches closed to the root of the beam was used as actuators and from the remain...
متن کاملNonlinear Analysis of a Flexible Beam Actuated by a Couple of Active SMA Wire Actuators
There are two different ways of using SMA wires as actuators for shape control of flexible structures; which can be either embedded within the composite laminate or externally attached to the structure. Since the actuator can be placed at different offset distances from the beam, external actuators produce more bending moment and, consequently, considerable shape changes with the same magnitude...
متن کاملActive Vibration Control of a Smart Beam by Using a Spatial Approach
The vibration control is an important and rapidly developing field for lightweight flexible aerospace structures. Those structures may be damaged or become ineffective under the undesired vibrational loads they constantly experience. Hence, they require effective control mechanism to attenuate the vibration levels in order to preserve the structural integrity. The usage of smart materials, as a...
متن کاملAdaptive feedforward and feedback methods for active/passive sound radiation control using smart foam
This work investigates and compares the potential of adaptive feedforward and feedback methods for a hybrid active/passive radiation control using smart foam. The radiating structure is a vibrating plate mounted in a rigid baffle in an anechoic chamber. The smart foam, designed to reduce sound by the action of the passive absorption of the foam ~which is effective at higher frequencies! and the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 2005
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.71.1827