Active Control of Wall Pressure Flow Field at Low Supersonic Mach Numbers
نویسندگان
چکیده
منابع مشابه
Control of Nozzle Flow Using Microjets at Supersonic Mach Regime
This article reports the active control of base flows using the experimental procedure. Active control of base pressure helps in reducing the base drag in aerodynamic devices having suddenly expanded flows. Active control in the form of microjets having 0.5 mm radius placed at forty-five degrees apart is employed to control the base pressure. The Mach numbers of the present analysis are 1.7, 2....
متن کاملPressure Sensitive Paint Measurements at High Mach Numbers
Depending on the case study examined, different PSPs may be used, each applied using a different method onto the model. For polymer PSP the paint is sprayed on. In contrast, the model may first be anodized or covered with a thin-layer chromatography plate and then dipped in PSP. The objective of the present study is to analyse the characteristics of different PSP substrates at high Mach numbers...
متن کاملBoundary Backstepping Control of Flow-Induced Vibrations of a Membrane at High Mach Numbers
We design a controller for flow-induced vibrations of an infinite-band membrane, with flow running across the band and only above it, and with actuation only on the trailing edge of the membrane. Due to the infinite length of the membrane, the dynamics of the membrane in the spanwise direction are neglected, namely, we employ a one-dimensional (1D) model that focuses on streamwise vibrations. T...
متن کاملThe Multiple Pressure Variables Method for Fluid Dynamics and Aeroacoustics at Low Mach Numbers
The incompressible limit of a compressible fluid, when the Mach number tends to zero, is a singular limit due to the fact that the governing equations change their type. The propagation rate of the pressure waves become infinite. Based on asymptotic results the multiple pressure variables (MPV-) method is reviewed as it may be used for the construction of numerical methods in this low Mach numb...
متن کاملThe Calibration of a 60’ Cone to Measure Mach Number, Total Pressure and Flow Angles at Supersonic Speeds
SUMMARY The oharaoteristics of a 60' apex angle cone for measuring local Maoh number, total pressure, and flow directions have been determined at Mach numbers of 2.47, 3.25, 3.97 and 4.32 at angles of pitch up to 29'.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOSR Journal of Mechanical and Civil Engineering
سال: 2016
ISSN: 2320-334X,2278-1684
DOI: 10.9790/1684-16053039098