Acoustic Emission NDT for monitoring hygro-mechanical reactions of coated pine wood: a methodological approach

Flexural monitoring of carbon fiber/epoxy composite by acoustic emission

Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mecha...

Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type

Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...

Mechanical Seal Opening Condition Monitoring Based on Acoustic Emission Technology

Since the measurement of mechanical sealing film thickness and just-lift-off time is very difficult, the sealing film condition monitoring method based on acoustic emission signal is proposed. The mechanical seal acoustic emission signal present obvious characteristics of time-varying nonlinear and pulsating. In this paper, the acoustic emission signal is used to monitor the seal end faces just...

A poroplastic model for hygro-chemo-mechanical damage of concrete

The paper proposes an analytical model for calcium leaching of concrete due to water. The model is set in the framework of chemically active saturated porous media. Continuum damage mechanics is used in order to develop a phenomenological poroplastic model of concrete. Two forms of damaging processes are included: mechanical, modelled with two scalar damage internal variables; chemical, related...

Acoustic Emission Application for Monitoring Bearing Defects