Acoustic emission monitoring of reinforced concrete wall-slab connections
نویسندگان
چکیده
منابع مشابه
Monitoring Fracture of Steel Corroded Reinforced Concrete Members under Flexure by Acoustic Emission Technique
Acoustic emission (AE) technique is used for monitoring and evaluating the influence of corrosion on the structural behaviour of steel reinforced concrete (RC) beams under three-point flexure test. In this study, steel corrosion was accelerated by electro-chemical method utilising a direct current (DC) power supply and 5% sodium chloride (NaCl) solution. The steel corrosion that was induced int...
متن کاملAcoustic Emission Monitoring of Multicell Reinforced Concrete Box Girders Subjected to Torsion
Reinforced concrete (RC) box girders are a common structural member for road bridges in modern construction. The hollow cross-section of a box girder is ideal in carrying eccentric loads or torques introduced by skew supports. This study employed acoustic emission (AE) monitoring on multicell RC box girder specimens subjected to laboratory-based torsion loading. Three multicell box girder speci...
متن کاملAcoustic Emission for Monitoring Damage Ac- cumulation in Reinforced Concrete Structures
Acoustic emission (AE) analysis is a good tool for monitoring the formation of damage in a structure. A loading experiment with a reinforced concrete beam was carried out and the obtained AE data were analyzed in order to get information about the internal processes of deterioration. Events could be localized, and their estimated source coordinates coincide with the developing crack planes. The...
متن کاملMonitoring Damage Using Acoustic Emission Source Location and Computational Geometry in Reinforced Concrete Beams
Non-destructive testing in reinforced concrete (RC) for damage detection is still limited to date. In monitoring the damage in RC, 18 beam specimens with varying water cement ratios and reinforcements were casted and tested using a four-point bending test. Repeated step loads were designed and at each step load acoustic emission (AE) signals were recorded and processed to obtain the acoustic em...
متن کاملFinite Element Modeling of GFRP-Reinforced Concrete Interior Slab-Column Connections Subjected to Moment Transfer
A finite element model (FEM) was constructed using specialized three-dimensional (3D) software to investigate the punching shear behavior of interior slab-column connections subjected to a moment-to-shear ratio of 0.15 m. The FEM was then verified against the experimental results of full-scale interior slab-column connections reinforced with glass fiber reinforcement polymer (GFRP) bars previou...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2020
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2020.119661