Acoustic emission characteristics of instability process of a rock plate under concentrated loading
نویسندگان
چکیده
منابع مشابه
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملfailure behavior assessing of wood strands under tensile loading using acoustic emission technique
with the aim of identifying failure mechanism in oriented strand boards, failure behavior of wood strands under tensile load was investigated using acoustic emission technique. resinated and unresinated strands were arranged at top, middle and bottom section of the board before pressing. tensile and acoustic emission tests were performed simultaneously on treated and control samples. using tens...
متن کاملCharacterisation of Acoustic Emission Sources in a Rock Salt Specimen under Triaxial Load
This study presents the application of an automated moment tensor analysis procedure on microcracks which were generated during a triaxial compression test of a cylindrical rock salt specimen (diameter 150 mm, length 300 mm). The acoustic emission signals were detected in a frequency range between 20 kHz and 1 MHz using 12 acoustic emission sensors mounted on the surface of the specimen cylinde...
متن کاملSimulation Analysis on the Strength and Acoustic Emission Characteristics of Jointed Rock Mass
Original scientific paper To analyse the influence of joint angle, number and spacing on the strength and acoustic emission (AE) characteristics of rock mass, the uniaxial compression model of rock specimens was established using the micro particle flow PFC2D software platform. The intact rock parameters were determined via trial and error, joints with different angles, numbers and spacing were...
متن کاملDetermination of Damage Constitutive Behavior for Rock Salt Under Uniaxial Compression Condition with Acoustic Emission
The mechanical characteristics of rock salt have an important influence on the safety of the salt cavity. The acoustic emission (AE) technique was used to analyze the generation of microcracks in rock salt under uniaxial compression condition. By monitoring acoustic emission in whole process of stress strain curve under uniaxial compression test, the damage characteristic of rock salt is obtain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frattura ed Integrità Strutturale
سال: 2016
ISSN: 1971-8993
DOI: 10.3221/igf-esi.36.18