Acidic Influence in Conversion of Hospital Plastic Waste into Liquid Fuel using Kaolin Base-supported Catalysts

نویسندگان

چکیده

Assessing acidic influence in conversion of hospital plastic waste into liquid fuel with kaolin base supported catalysts was carried out using samples collected from a tertiary University teaching Hospital Sokoto, which encompassed Drip bags (Linear low density polyethylene LLDPE), Hand gloves (Polyethylene terephthalate PET) and Urine (Polyureathane PU). Uncatalyzed pyrolysis first thermal cracking only at 300, 350, 4000C. Catalyzed also three different active catalyst mounted on same support equal catalytic ratio to support. CuO/Kaolin-SO4, FeO/Kaolin-SO4 CaO/Kaolin-SO4. The obtained uncanalyzed catalyzed the sample were all subjected GCMS FTIR analysis. conducted Fe2O3/Kaolin-SO4 (CAT.D), CuO/Kaolin-SO4 (CAT.E), CaO/Kaolin-SO4 (CAT.F). activities synthesized successfully tested fuel. However (CAT.D) found be more promising selective fraction then followed by CAT. E F. Therefore, results shows that CAT.D has lower cocking tendency result high than other catalysts. GC/MS analysis revealed chemical composition carbon number distribution indicate presence paraffinic, naphthenic olefins hydrocarbons as dominant component obtained, amount hydrocarbon range CAT.D. Thus, sulphated better modifying product CAT.E

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Catalytic conversion of waste low density polyethylene into fuel oil

Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...

متن کامل

Environmentally Harmful Low Density Waste Plastic Conversion into Kerosene Grade Fuel

Plastics wastes from a municipal solid waste (MSW) plant have a high-energy content and are suitable for fuel generation. Thermal cracking is one of the possible ways to obtain petrochemical feedstock from polymer wastes. Municipal waste plastic of LDPE conversion to kerosene grade fuel experiments were carried out under atmospheric conditions at temperatures between 150 ̊C and 420 ̊C. Low densit...

متن کامل

catalytic conversion of waste low density polyethylene into fuel oil

waste low density polyethylenes (ldpe) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. the effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. the effect of catalyst o...

متن کامل

Thermal Conversion of Waste Plastics into Fuel Oil

In the last few decades, there has been a dramatic increase in industrial and urban activities, culminating in the need for people to adopt improved living conditions. This has led to an increase in the use of packaging materials, mainly in the form of plastic. Plastics have become an indispensable part of today’s world. Due to their lightweight, durability, energy efficiency, coupled with ease...

متن کامل

Thermal Conversion of Waste Plastics into Fuel Oil

In the last few decades, there has been a dramatic increase in industrial and urban activities, culminating in the need for people to adopt improved living conditions. This has led to an increase in the use of packaging materials, mainly in the form of plastic. Plastics have become an indispensable part of today’s world. Due to their lightweight, durability, energy efficiency, coupled with ease...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of applied science and environmental management

سال: 2023

ISSN: ['2659-1502', '2659-1499']

DOI: https://doi.org/10.4314/jasem.v27i4.6