Acidic Bath for Tin Electrodeposition Containing Cationic Surfactant
نویسندگان
چکیده
منابع مشابه
Cationic surfactant modified wood sawdust for removal of acidic dyes
In this paper, application of sawdust prepared from Narra wood (SD) modified with cationic surfactant of cetyltrimethylammonium bromide (SD/CTAB) was used for removal of two typical acid dyes commercially named as Acid Green 25 (AG25) and Acid Red 14 (AR14) from aqueous solutions. The effects of experimental variables, such as pH, initial dye concentration, adsorbent dose, contact time and temp...
متن کاملthe effect of anionic and cationic surfactants on electrodeposition of ni/tin nanocomposite coating
composite electrodeposition is a low-cost and low-temperature method, which is used to make metal matrix composite coatings. in this study the surfactant of anionic(sds) and cationic (ctab) is used as additive in composite coating of ni/tin. the results showed that the anionic surfactant caused more particles in the composite coatings. increasing sds concentration to the optimal value leads to ...
متن کاملInvestigation of corrosion behavior of galvanized mild steel by improved Zn acidic bath, containing nano-ZnO particles
In this study, nano-ZnO particles were deposited on mild steel sheets from an acidic zinc bath. These particles were synthesized by using an auto combustion technique. The effect of concentration of nano- ZnO particles on the corrosion behavior of depositions was investigated. The results of salt spray tests and electrochemical measurements showed that corrosion resistance is improved by additi...
متن کاملSpontaneous aggregate transition in mixtures of a cationic gemini surfactant with a double-chain cationic surfactant.
Controllable aggregate transitions were realized by mixing two kinds of cationic surfactants, hexylene-1,6-bis(dodecyldimethylammonium bromide) (C(12)C(6)C(12)Br(2)) and didodecyldimethylammonium bromide (DDAB). It was found that two parameters are the main factors determining the aggregation behavior of the mixed system, the total concentration of DDAB and C(12)C(6)C(12)Br(2) (C(T)), and the m...
متن کامل3D tin anodes prepared by electrodeposition on a virus scaffold
A patterned coreeshell tin (Sn) nanorod anode is fabricated by pulse electrodeposition of Sn onto a selfassembled Tobacco Mosaic Virus (TMV) structured nickel current collector. Pulse electrodeposition onto the virus assembled 3D electrode surfaces produces homogenous Sn coatings with significant void space to accommodate the large volume change associated with Sn lithiation. The TMV enabled 3D...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1969
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.20.6